Starview RS232 to RJ45 adaptor schemetic

[thefantom]

After a bit of reseach this is what I have come up with to build your own LAN adaptor for the SV7

You will need the following

Electrolytic Decoupling Capacitors - 10uF/25V
Capacitor Ceramic 0.1uF
RJ45 Ethernet MagJack Breakout
RJ45 Ethernet MagJack
9 Pin Female Serial Connector - Solder Cup

Ideally the MagJack you want is

TRJ0011DNL from trxcom

this is the one used in the SV but you can only order that from China.

and follow the pic attached.

[cactikid]

bravo my friend,did you say it worked?

[thefantom]

Yup the magic is in the mag jack. All the components are fairly easy to get hold off. Just need to check the spec of the mag jack and make sure it's the one with a transformer pulse. I'll post the PDF specs - I just need to dig the out of my other computer.

[rhinoranger]

RS232 to RJ45

hello, can anyone tell me if these two on these 2 links would be any good on the starview 7,they look the same but have different product numbers,the wiring diagrams are at the bottom of the pages

(1) RJ45 Female Socket to 9 pin Serial DB9 Male Adapter - UT-151 - kenable for HDMI Optical TOS Network Ethernet RJ45 Scart Audio Phono Jack USB Firewire 800 ADSL Cable Leads

(2) RJ45 Female Socket to 9 pin Serial DB9 Socket Adapter - UT-152 - kenable for HDMI Optical TOS Network Ethernet RJ45 Scart Audio Phono Jack USB Firewire 800 ADSL Cable Leads

[rhinoranger]

RS232 to RJ45

sorry, i meant to put this link on as well, gender changer for the RS232 to RJ45 "if it works"
Gender Changer 9 pin Female to Female Serial RS232 Adapter - AD-102 - kenable for HDMI Optical TOS Network Ethernet RJ45 Scart Audio Phono Jack USB Firewire 800 ADSL Cable Leads

[thefantom]

Nope none of them will work - build your own from the above pics. Like I said the magic is in the macjack.

[thefantom]

Specs for the MacJacks

Specs for the macjacks attached

[CABLEBOY1]

Will These Work From RS Buy Embedded Peripherals RJ-45 with built in Magnetics Ind Temp Halo Electronics HFJ11-E2450ERL online from RS for next day delivery.

[richardbransongotu]

lan connecta

After a bit of reseach this is what I have come up with to build your own LAN adaptor for the SV7

You will need the following

Electrolytic Decoupling Capacitors - 10uF/25V
Capacitor Ceramic 0.1uF
RJ45 Ethernet MagJack Breakout
RJ45 Ethernet MagJack
9 Pin Female Serial Connector - Solder Cup

Ideally the MagJack you want is

TRJ0011DNL from trxcom

this is the one used in the SV but you can only order that from China.

and follow the pic attached.

good job mate but is it cost effective to build ya own?

[CABLEBOY1]

will that part work for the job ??

[thefantom]

That don't look right m8.
Check out this one and compair the specs

SparkFun RJ45 Ethernet MagJack (PRT-08534) | Proto-PIC.co.uk
SparkFun RJ45 Ethernet MagJack Breakout (PRT-08790) | Proto-PIC.co.uk

Should work and only costs a few squids !

[thefantom]

You'll need these as well

SparkFun 9 Pin Female Serial Connector - PCB Mount (PRT-00429) | Proto-PIC.co.uk
SparkFun Breakout Board for Serial DB9 (BOB-08552) | Proto-PIC.co.uk

[cactikid]

i see a few on fleabay also,originals.sorry for stepping on toes

[thefantom]

i see a few on fleabay also,originals.sorry for stepping on toes

Your not stepping on my toes m8. If someone is any good with a soldering iron make one for under 10 squids. Else buy one for ?25 to ?30.

Does not really mater to me

[gazzapriest]

i trying to make one i will see if this is anygood