STARVIEW 1

[luda62uk]

BOX WAS WORKING O , BUT TRIED TO download new firm ware ,(think down loaded starview 2 THE BOX) now its not working,,, any help???????

[luda62uk]

i sorted it, via info from another sorce,.
Its just a bad flash load the SV1 firmware again using this method:

Connect the box to the pc with your cable but switch it off at the back. Load the correct firmware bin file into GTRom & set it to the correct com port, and select App file only then hit Download.

Only then switch on at the back to power on the box. It may take a few sec. so wait at least 30 sec. (If it doesn't work 1st time try also waiting a couple of sec. to switch on after pressing download in the loader.) It may take more than 1 try to work, but eventually you'll see the loader kick in and the % bar increase. You won't see the % on the Starview though. Only green lines moving left to right. Towards the end of the flash you'll see a message in GTRom saying FLASH BURNING. Then it will reach 100% and wait for the download complete pop up box to appear & the box will reboot back to factory setup. You will have lost any channel data previously on the box & will need to rescan & switch on EMU and set the box up from scratch.

thanks to who ever that guy was...

[silver30]

can anyone tell me where to get latest starview 1 filmware and gtrom 4 p.s. not a clone
help

[wilf]

its in here m8 http://www.digital-kaos.co.uk/forums/dlcat-starview-23/

[camelv]

can anyone tell me where to get latest starview 1 filmware and gtrom 4 p.s. not a clone
help

use the link from wilf m8 to get the firmware and make sure you use the core 400 bin file if its an original box,

[luda62uk]

anyone help on why "GOLD" channel freezes up on sv 1?

[camelv]

Do a factory default on your box m8 then set default key and emu to on and then autoscan ,this should bring it back.

[fukwullie]

hey wot the code 2get in2 the emu menu can any1 help plz as ive forgot

[mtv1]

1570 hope this helps