can any one tell me how to flash the starview 3 box thanks
-
-
Have a read in the corrrect forum m8 Starview
Bound to get the info you need there
THE TRUTH
The Hillsborough Independent Panel. 12/09/12
Today's report is black and white.The Liverpool fans were not the cause of the disaster.
The panel has quite simply found 'no evidence' in support of allegations of 'exceptional levels of drunkenness, ticketlessness or violence among Liverpool fans' and 'no evidence that fans had conspired to arrive late at the stadium' and 'no evidence that they stole from the dead and dying'. -
First of all make sure you have the latest firmware on the box. Should be 8.04
You check this from the menu - System setup/System information
If you haven?t got 8.04 you can download from the sticky threads.
Plug you Box into your Pc using Null modem cable. (or USB to 9pin female cable- you will probably need the drivers for the usb. You can find these in the download section)
Click on the 8.04 file .When gt rom appears select download.(usually on com 1) Wait till it has fully 100% downloaded.
Once you have flashed the new firmware go into the menu and do a factory reset.
Rescan the box choosing your local cable provider.(N*L etc) Choose english-autoscan
Once the channels have saved, exit out 3 times.
Press menu and then 1570 you will go into another secret menu.
Highlight the default key and press ok.
Then scroll down to the emu and turn it on.
Exit out and put your box onto a S*y sp1
Wait for it to update. This may take a while.
You should be now all up and runningComment
Comment