problems with the starview pvr

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • spondulick
    DK Veteran
    • Dec 2008
    • 677
    #1

    problems with the starview pvr

    i hope someone can point me in the right direction am trying to get my mates pvr up and running the sw is ver3.105,8 dec 2008 at the moment i can only get fta chnls have found sw dated 21 12 2008 but cannot load is there a firware loader available to download the apps file cannot use usb as have no adapter, and finding it impossible to get into secret menu if any one has had this problem with this model i would be very grateful for any help.
    Tags: problems, pvr, starview
    • bugaloo41
      V.I.P. Member
      • Jul 2008
      • 1598
      #2
      Copy/pasted from elsewhere - seems to be 2 methods of flashing. if you need the loader just download the box or sv1 loader i cant see why they wont work. they are in the red stickys

      How to Update PVR Firmware


      There are two methods to upgrade PVR Firmware as below:

      1. USB Download
      2. Serial Download.


      1. USB Download
      1) Connect PC & STB with USB Cable
      2) Main Menu-> Select ?HDD Mode Change PVR?-> Press ?0000? on the RCU
      ( Showed ?HDD Mode Change PC? )
      3) In PC
      a) Showed new Local Disk on the PC ( ?F:W? or ?E:W? )
      b) Copy new Firmware in the Local Disk.
      4) Remove the USB Cable
      5) Main Menu-> Select ?HDD Mode Change PC?-> Press ?0000? on the RCU
      Once ?HDD Mode Change PVR?, STB is automatically re-boot.
      6) Main Menu-> ?Select HDD Interface? ->?Select Upgrade from HDD?
      Select ?new firmware -> Press ?0000? on the RCU
      7) Automatically upgraded & re-boot.

      2. Serial Download
      1) Connect PC & STB with Serial Cable
      2) Off & On with A/C Power on the rear panel.
      3) Once display ? on ? on the front panel,
      Press ? OK->Exit->OK->Exit->OK->Exit ? on the RCU.
      4) Display ?B-30 or B-31? ( ready to download message ) on the front panel.
      5) Access the PVR Loader and then select the firmware bin file.
      6) Download.
      7) Wait to complete and Reboot.

      the cas menu seems to be > menu > parental control > press ( i or info button) + (2007)

        Comment

        • spondulick
          DK Veteran
          • Dec 2008
          • 677
          #3
          thanks for your input, and advice. there is one more problem i overlooked could not get sound on tv after failed flash scart ok in use on my eurovox....thanks again iwill try tomorow....going for a few pints.

            Comment

            • spondulick
              DK Veteran
              • Dec 2008
              • 677
              #4
              thanks bugaloo 41 and all at digital kaos your info has been spot on reciever is now up and running with all chanels restored

                Comment

                Previous template Next
                Working...