SV4 and formatting usb stick

[alnaz]

Hi all got a 1gb maxell stick from Asda and having trouble formatting the thing in the SV4 box. When i press the yellow button to format the thing it briefly pops up a format failed error message and still leaves 2 empty folders that were already on the stick, a back up folder and a data folder not sure if these are from the starview or not. I can format on my Pc but have read of getting the 8882 error if not formatted via the box.
Is it a case of sticking the stick in and pressing the format button or does something have to be done first.

cheers Naz

[alnaz]

Thanks mate, just got it going and everything was ok. Got 3 more boxes to do, now this might sound like a stupid question but do i have to reformat the stick for each box or can the software on the stick now be used for each separate box.

cheers Naz

[paulsarcade]

Help!!!

Hi folks
Im a complete newbie to this whole thing and nned an idiots guide. I have a starview 4 box and cannot detect a signal. Is it possible to connect to sky dish? I live in scotland if that helps.

Would be handy if some really helpful user could send a complete set up gudie to [email protected]

[crillin]

you can use the usb pen on the other starview no reformatting required sorry did not see joks reply

[khenryashley]

It will do for all your boxes m8.

[khenryashley]

Hi folks
Im a complete newbie to this whole thing and nned an idiots guide. I have a starview 4 box and cannot detect a signal. Is it possible to connect to sky dish? I live in scotland if that helps.

Would be handy if some really helpful user could send a complete set up gudie to [email protected]

No m8. The Sv4 is a cable box. you need a live cable feed

[alnaz]

Cheers All got them all going no probs i used the 1.07 firmware and made sure i turned off the box at the switch on the back when inserting and taking out the stick.
I am quite impressed with this box i like the epg and the picture looks better than the version 3 box i had before.

cheers Naz