If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Ok, I have stopped being quite so thick but even after flashing 1.7 I cant find and channels on the box.
I have seen that some box's require codes to be changed.
If I need to do this, where do I find them.
Thank you
m8 can u get any channels ?? can u get the freeview channels??if u can get the freeview channels u need to turn the keycode on by pressin 1 5 7 0 on ur remote to open secret cas menu then turn keycode on and press default and exit bac to sly sports and let update ...if no channels at all go to menu gotosystem setup goto system information and check to see if u have flashed 1.07 correctly it shud say 1.07//if not reflash
Hi
Thanks for the reply.
I did the flash and it says its worked. Dec 2008, 1.07.
Then I did 1570 and changed the option there.
Exit and Scan on the nt1 option and nothing appears ?
Hi
Thanks for the reply.
I did the flash and it says its worked. Dec 2008, 1.07.
Then I did 1570 and changed the option there.
Exit and Scan on the nt1 option and nothing appears ?
make sure you factory default the box before you scan it then do the set default and keycode on then leave on sly sports 1 to update
sigpic
its the stuff we think we know that stops us all from learning
Hi
Thanks for the reply.
I did the flash and it says its worked. Dec 2008, 1.07.
Then I did 1570 and changed the option there.
Exit and Scan on the nt1 option and nothing appears ?
i cant get any channels with ntl,have to use t/pest or xcountryand western. try them...ynwa
Still the same lads, nothin happening. Downloaded V1.09, loaded it on the box, rescanned, nothin.
Is tis the Nagra3 I've heard about ? Is that the end of my box?
it depends on your location dublin galway waterford ntl are streaming s*y sports and movies on nag 3 dont know about uk you should be getting some channels check is your cable in the right inlet
Comment