the box super not loading

[archman]

hi guys my brother gave me his starview 3 to hav a look at as it
wasnt workin,when i switch it on nothing comes on screen doesnt respond to remote apart fom standby button,does power up cause a channel number appears on front of box,been reading through posts which suggest it could be logo bin file
but cant find a logo bin file for a starview3.any help apprecciated thnx

[satsmo]

Have you tried reflashing it with the latest firmware? http://www.digital-kaos.co.uk/forums...3-8-04e-14963/

[archman]

thnx satsmo will give it a try tonite will let you know

[archman]

the box super not loading

reflashed box with firmware 8.04e still the same result
after flashing powered box on and on front of box it said boot...
ld80 then ON..then numbers 0107 came up which i think could be channel number cause i could go up through the numbrs

[mtv1]

try factory reset and manually input keys might work best of luck menu 1570 etc.

[satsmo]

LD80 problems can sometimes be resolved by using earlier firmware revisions, try from V6.00 upwards, (earlier firmware revisions will not AU so you will need to manually input codes).

But before flash factory reset, turn off box for a minute at back switch then back on. Then reflash as said above.

There were two batch types of Starview 3s and one batch suffered this problem, as did the clone boxes. Try and see how you get on.

[archman]

i cant get the menu up to do the factory reset ??
as soon as i power box on i dont even get the box super logo just blank screen right away

[satsmo]

OK, try as said flash with older firmware and see how it goes. If you can get into the menu after that, then progress back to the latest revision and see how stable it is.

[archman]

satsmo been lookin but cant find the older firmware

[satsmo]

Version 6.00

http://www.4shared.com/get/45757662/73639e41/GTRom_Super_600e.html

Version 6.01

http://www.4shared.com/get/46991676/866ca229/GTRom_Super_601e.html

Version 7.05

http://www.4shared.com/get/46991427/8f98b294/GTRom_Super_705e.html

Version 7.09

http://www.4shared.com/get/52726203/56a624e8/GTRom_Super_709eBETA.html

Version 8.00

http://www.4shared.com/get/52214609/c1e46c2/GTRom_Super_800e.html

Start off at the earliest revision, check the box for stability and see what the results are. Some revisions may prove more stable and you may be able to update to the latest version after you have found the most stable version for your box.

After all that and the problem still remains, it may be a hardware problem, e.g., bad cap on the PSU.

[archman]

tried them all still the same so it looks like a hardware problem as you said..thnx for all your help

[spiderman001]

Starview 4 - The Box USB

Howzit china's ..any1 found update to the the box usb as yet ...?

[young]

archman might be a daft answear but try the scart in the top scart socket pal