wee prob with a couple o channels

[stuckylad]

hi,not getting setanta1 or 2 and rangers tv,any ideas? im on telepest in n/lanarkshire,cheers

[gazza2008]

hi,not getting setanta1 or 2 and rangers tv,any ideas? im on telepest in n/lanarkshire,cheers

Try rescanning ya box m8

[stuckylad]

done a rescan,still the same,would it be worthwhile doing a master reset or is there summit else i could try,thanks for the response m8.

[boomer39]

done a rescan,still the same,would it be worthwhile doing a master reset or is there summit else i could try,thanks for the response m8.

try setting default...then back to slyspts.. should be sorted then. often find missing channels after 999... ynwa

[stuckylad]

when pressing set default key it flashes please wait for saving is that normal?

[satsmo]

Yes it is normal. However if transponders have moved/changed, then you need someone to tell you the new frequencies for your area.

Or preferably you need to do a factory reset, scan again and turn your emu back on. Dependent on which model you have you may need to set your channel list back up if you have it edited to your preference.

If it is a SV3 or SV4 then it will map the channels as per VM line up automatically.

[stuckylad]

cheers satsmo,am i correct in thinking it is 1680 for a factory reset?

[satsmo]

1668 is the master password. Which model is it?

[stuckylad]

its a sv1 clone which has been a good servant to me ,cant complain about it

[satsmo]

No bother but remember as I said above you will need to set your channel list back in order, if you had it set to a personalised list.

[mtv1]

hi sats m8 i have neighbor has a starview 3 every 2 days or so the 01 line of codes changes just 2 numbers the same ones every time i flashed it but to no avail any ideas m8 thanks in advance

[satsmo]

Sounds like an older non AU firmware, although I presume you would have used the latest.

Did you try pressing the default key as this would usually clear that symptom on a box with the latest firmware.

[mtv1]

i will try again m8 and i will let you know cheers m8

[bigshak]

i have a box super usb and have lost trouble 1 and 2 and setanta 1 and 2 and some discovery channels, i did a automatic scan but no luck they still not working....sly 1 came back tho

[Wozzie]

I'm experiencing the same problem myself mate - no joy with the auto scan!!!