virgin media codes

[stevekirs0p]

morning all, i am waiting indoors in anticipation of my super usb arriving today - quick question - is it simply a case of installing the new firmware 1.07 then plug and play or do i have to find these codes that i keep hearing about and input them also?

sorry total newb here is learning much as he can by reading the threads

[wilf]

you wont need keys (codes) if you update firmware as this will autoroll the keys (codes)

[stevekirs0p]

Thanks mate !

[camelv]

Thanks mate !

make sure you read through the tuts m8 as there are one or two things you need to do to ensure you flash your box properly .good luck .

[boomer39]

and dont forget to switch box off before inserting or rmoving your usb stick..vip..ynwa

[stevekirs0p]

Well still waiting for good old royal mail special delivery to arrive!

I'm not completely new to computers so think i have sussed it - if i`m right then i put the new firmware onto a usb stick, power the unit off - insert usb then power back on - install logo file then firmware file.

connect to cable supply, scan for channels, then do the secret menu bit?

i will have another good read first- just one thing - the firmware i downloaded is in .Bin format with no >cue file - is there way of extracting the files or does the starview just read the .bin appropriately.

Apologies again if i am boring you with useless questions it will prob be a lot clearer when i actually get my hands on the unit.

Regards

Steve

[Emile Austin]

Well still waiting for good old royal mail special delivery to arrive!

I'm not completely new to computers so think i have sussed it - if i`m right then i put the new firmware onto a usb stick, power the unit off - insert usb then power back on - install logo file then firmware file.

connect to cable supply, scan for channels, then do the secret menu bit?

i will have another good read first- just one thing - the firmware i downloaded is in .Bin format with no >cue file - is there way of extracting the files or does the starview just read the .bin appropriately.

Apologies again if i am boring you with useless questions it will prob be a lot clearer when i actually get my hands on the unit.

Regards

Steve

You can't read the bin file but the SV4 does.