Starview 3 The box super problem

[maca]

I have the same problem i think its a fault from the forum as i cannot download the file either.

no problem with the forum m8 ....

[vtorres]

Maybe i have the same problem as jn04ble.

[satsmo]

As maca said the link in our downloads is fine. But as you are having a problem here is a copy of it. Just cut and past the link below into your browser and download:

http://www.mediafire.com/?3cqyviuyikv

[vtorres]

Thanks i have the Gtrom is that the only file i need or do i need a bin file ? Also could someone tell me a step to step guide doing it via a usb to 9pin serial adapter ?

[martin-f]

on the starview 3 f/w its all in one m8

thanks to dooby2oon for this

Lets just check what you will need in addition to a computer to get your Starview box up and running.

On older pc's 1 null modem cable



If your pc's newer or most laptops you may need 2 cables a usb to serial and a null modem cable pictured below
Get these from fleebay usually around ?5 to ?7 for the pair


If you have any problems with usb to serial connection follow this little tut
To see which port your USB adapter is connected to, connect your USB adapter and follow the following instructions:

1. Go to the Start Menu
2. Right click on "My Computer" in VISTA it's listed as "Computer"
3. Select "Properties"
4. Click on the "Hardware" (In VISTA just click device manager top left)
5. Click on "Device Manager in XP"
6. Click the + sign next to "Ports (COM & LPT)"
7. One of the listed ports should indicate which port your USB adapter is connected to (e.g. COM1, COM2, COM3, etc.)

If port is not listed between com 1 to 4 then follow guide below if ok jump down to section 8

USB to serial drivers download if needed

[url=http://www.gilsson.com/usb_drivers_download.htm]USB to Serial Adapter driver downloads and documentation[/url]

Because GTRom will only let you select com 1 to 4 we have to change it to one of these
now right click your usb-serial com port scroll down to properties, in here click port settings then advanced button then in here you will have a button to change com port number i use vista but should be same for xp


8. Go back to your gtrom software program that you use to transfer data and make sure it is set to the correct port.
9. You should be able to transfer/download data once the correct port is selected


Ok so you've got you cables now you need GTRom click file below to flash box with.

New fix auto roll

Now onto updating your box do not switch off your Starview or your computer at any point when updaing box.

Using the Nullmodem cable, plug one end into your computer and the other end into you Starview box.

Switch both your box and computer on when into windows load up GTRom_Super of choice from files above.


Select your com port. Now these new GTRom's have bin file built in so just hit download.


As on earlyer GTRom's it will pause on 100% .


But wait untill you get download complete box pop up.


Above might take alot longer when using usb to serial lead.
Right that's it now we need to disconnect from pc and reconnect the starview to the tv




When scan complete exit back to tv then press menu then 1570 to bring up screen below

Now go down to key emu and press right to turn on



Now exit back to tv That's it



Next bit is after you have flashed with new firmware not trying to update & firmware stuck on 0%

I've had a few of these super box's hang after updating with firmware on 0% with a flicker every ten secs or so at this point its trying to update keys, if this happens just flick power off on the back then flick back on will then update keys as normal

[vtorres]

Thanks so much so your saying after all of that my starview 3 box will stop rebooting ?

[martin-f]

i have not read through all the thread but worth a try i presumed you wanted help flashing your box sometimes a reflash can cure problems

[vtorres]

Yeah i hope it works as i am having to spend 20 quid on the usb adapter. If it doesn't work i will be very upset not with you lot though but it will annoy me

[martin-f]

?20 thats very expensive have you looked on ebay or just get a Rs232 null modem cable and use a friends pc you can have problems at times with laptops / drivers just to cheer you up a bit good luck m8

[vtorres]

Thats the thing I actually have a null modem cable just found it minutes ago should i use a friends computer then ? But does that mean i need to put a french cable in there sockets not too sure if people will be pleased with that ?

EDIT - I will not be able to take out the NTL cable thing and if i did take it out not to sure i could get it back on

[vtorres]

I have one of them 2pin shaver things but it says shavers only are they safe to use ?

[maca]

yes m8 but i preffer a wet shave

[vtorres]

Very true Thanks for your help ill let you all know what i decide to do.

[vtorres]

I went to my mates house and have updated the firmware to 8.04e using the GTrom provided just need to plug the box back in i will comment again to say if it works or not. But say it doesn't what do i do ?

[jn04ble]

As maca said the link in our downloads is fine. But as you are having a problem here is a copy of it. Just cut and past the link below into your browser and download:

http://www.mediafire.com/?3cqyviuyikv

I've put in the link above but it doesnt give anything to download. Any information would be appreciated.

Please ignore above. am getting the download now but it is freezing at 99%!