Please help - have I follower right steps?

[danhenshy23]

Hi
I am trying to get my starview 3 box working after it being not in use for about a year.

When I select a channel I get the following in an info box, "data is being updated... [XX%)" It will make its way up to 100% before restarting and doing the same thing over and over

Through reading different posts on various forums I have tried the following.

- I have downloaded Keymaster V1.2 and entered the keys for T******t, as I am using V***** M****.

- I have made sure that both keys were stored correctly (ie store the key before moving to the next)

- I have made sure that EMU is set to "on"

What else could the problem be? Could it be that the key has expired from the one that was on KeyMaster 1.2? Or is T******t not the one I should be using?


Dan

[good2know]

matey a while back all the starview boxes went off and the way the keygens worked was altered... new firmware was brought out to correct this, may i sugest looking for the latest starview 3 firmware and applying it before doing a scan.

hopefully this will sort you out, i don't come on too often but there are a lot of people on here with great knowledge of your box... if you read the threads someone will have listed a solution to suit you previously.

all the best

G2k

[martin-f]

some info on this thread m8 for that box

[url]http://www.digital-kaos.co.uk/forums/f83/starview-3-box-super-problem-55599/index3.html[/url]