Starview The Box USB - not sorting channels

[gaz108]

Hi all

Had box for about 6 months now, worked fine after v1.10 installed.
installed v1.12 worked fine for about a month, now won't find normal channels and sort for EPG,

If i scroll through the full channel list it shows 2-5 of each channel 1 of these seems to work for each that should be there. Other than channels 1-5!

would be gratefull for any suggestions

Ta
Gaz

[slapdap]

Have you tried doing a factory reset and rescanning the channels?

Factory Reset: press menu - select system setup then factory default enter the code 0000 press OK. Box will reboot - select language then do an automatic scan then go into the ssecret menu and switch on the keycode to on and select set default key. Then set up any user settings i.e output types.

[boomer39]

try, menu,1570,default.make sure emu/keycode is on,then exit....

[Emile Austin]

Hi all

Had box for about 6 months now, worked fine after v1.10 installed.
installed v1.12 worked fine for about a month, now won't find normal channels and sort for EPG,

If i scroll through the full channel list it shows 2-5 of each channel 1 of these seems to work for each that should be there. Other than channels 1-5!

would be gratefull for any suggestions

Ta
Gaz

You'll be better going back to v1.07. cheers