starview help needed

[hodgey]

it was all working fine until yesterday,, when i tried to re scan it to get ESPN

now i only seem to be able to get terrestrial channels and a couple of freeview channels

its driving me up the wall,, any advice or help appreciated

hodgey

[hodgey]

thanks that sounds very familiar to when i first got and installed the box,, i will try it after my lunch

cheers again
hodgey

[cactikid]

and write it down on a bit of paper for next time,as you will be doing it again.

[inch]

Starview "The Box" - Factory reset completed - still not working

Hi, just completed factory reset, menu 1570 turn emu on.

Box just keeps on updating, could you confirm how long this process takes, its been updating now for nearly 20mins.

Thanks

[maca]

Hi, just completed factory reset, menu 1570 turn emu on.

Box just keeps on updating, could you confirm how long this process takes, its been updating now for nearly 20mins.

Thanks

switch box off from the back m8 and on again and let it update..maca..

[wilf]

it dont usually take that long. did you rescan after factory reset?

[inch]

Starview not working after factory reset

Yes, these are the following steps i took:

1. Factory reset - 0000
2. menu 1570 - switch emu on, set default
3. installation - automatic scan - ntl.

is this correct procedure.

[wilf]

do as per joks instuctions a few posts up mate

[inch]

starview not working after factory reset

Hi,

I followed joks procedure & it still keeps on updating!

help please!!!!!!!!!!!!!!

[maca]

Hi,

I followed joks procedure & it still keeps on updating!

help please!!!!!!!!!!!!!!

ok m8 menu factory reset 0000 then 1570 press default key.
then auto scan
when finished exit out to main menu
then 1570
turn emu on
exit out to tv and let the box update..

[khenryashley]

Hi,

I followed joks procedure & it still keeps on updating!

help please!!!!!!!!!!!!!!

And make sure you press the default key

[inch]

Starview still not working after factory update

Hi,

Thanks for the info, but still not working, still updating, could it be a problem with my system Info:

THE BOX
API ver: 4.51e_E
Boot ver: 7.0
9.Jul.2007

Thanks

[maca]

Hi,

Thanks for the info, but still not working, still updating, could it be a problem with my system Info:

THE BOX
API ver: 4.51e_E
Boot ver: 7.0
9.Jul.2007

Thanks

http://www.digital-kaos.co.uk/forums...-loader-18314/
this the latest fix m8

[inch]

starview keeps on updating after factory reset

Hi Thanks for the Info,

Is the problem with my box contnuing to update due to my system info being old?

Would it be possible for you to talk me through process of updating this & do i need any special leads.

Thanks once again for your help

[mtv1]

null modem cable all the info you need is here http://www.digital-kaos.co.uk/forums/f83/ good luck