StarView 1 - Update Loop?

[tezza73uk]

Sky Sports 1 isn't working on my bro's StarView 1 when I connect it at my place. I read on another thread that I should use hidden menu 1570, "set the default key" but now the box stops at "INFO: data is being updated.. [120%]"

When I restart the box, it starts updating again, how do I get out of this loop?

[maca]

just rescan it m8 .

factory settings 0000
auto scan
when done. menu 1570. turn emu on
then exit out to tv.

[tezza73uk]

Cheers maca58, will try it as soon as the missus has finished watching HollyOaks!

[tezza73uk]

The free channels are fine but what about the Premium channels, Sky Sports etc, keeps attepting to update and hovers at "INFO: data is being updated.. [120%]"?

[maca]

ok press default key then rescan m8. make sure your scanning from the main feed.

[khenryashley]

The free channels are fine but what about the Premium channels, Sky Sports etc, keeps attepting to update and hovers at "INFO: data is being updated.. [120%]"?

Have you done what macca has said.
Sometimes it takes a few minutes to update

[tezza73uk]

Cheers maca, do u mean "Set Default Key" in menu 1570, what does that do? I only have one cable feed in so assume that's what the box is scanning as I did have some channels.

khenryashley - yeh, I followed the steps... factory settings, auto scan, turned emu on etc.

[maca]

yes m8 (set default key). then exit out to sly sports for example and let the box update.

[khenryashley]

Cheers maca, do u mean "Set Default Key" in menu 1570, what does that do? I only have one cable feed in so assume that's what the box is scanning as I did have some channels.

khenryashley - yeh, I followed the steps... factory settings, auto scan, turned emu on etc.

The default key is in the 1570 menu. You scroll down to it then press Ok.
What firmware is on your box (check this in system info)

[tezza73uk]

OK, thanks maca. Have exited out to Sky Sports 2 but seems to be updating and getting stuck at 20%, assume it should only take 3or4 mins?

khenryashley - as below:
STARVIEW
API VER: 2.57e_E
BOOT VER: 7.0
16 AUG 2006

[maca]

ok tezza do 1 thing for me m8. turn the box off from the rear and wait for a minute or 2 then turn it back on again and see what happens..

[tezza73uk]

ok tezza do 1 thing for me m8. turn the box off from the rear and wait for a minute or 2 then turn it back on again and see what happens..

Switched it off at the back, left for 2 mins, when switched back on bar at the botom of screen said "72 - Sky Sports 2.." then "INFO: data is being updated..." appeared and is now stuck at 70%.

[maca]

have you done what i said in post2 m8..

[tezza73uk]

have you done what i said in post2 m8..

Yep, just checked, EMU is on. Just won't complete any updates

[maca]

OK, thanks maca. Have exited out to Sky Sports 2 but seems to be updating and getting stuck at 20%, assume it should only take 3or4 mins?

khenryashley - as below:
STARVIEW
API VER: 2.57e_E
BOOT VER: 7.0
16 AUG 2006

ok try this Digital Kaos - Downloads - Starview 1 UK AU Fix v1.5