Starview HD Combo LAN & NON LAN STBs

[crowsnest]

Hi all just unwrapped a starwiew combo + and was given this site by a long standing member. Being technically crap I might be using this site very regularly. I'll give the download a try & see what happens.

[gauntlet]

Hi all just unwrapped a starwiew combo + and was given this site by a long standing member. Being technically crap I might be using this site very regularly. I'll give the download a try & see what happens.

Hello and welcome to Digital Kaos,

[freshmen]

anbody can help i just bought a starview hd combo + i tried all those firmware but i still got 5 channels to view... please help thanks

[freshmen]

and my epg not working...thanks....

[freshmen]

Updated LAN firmware link http://www.digital-kaos.co.uk/forums...91/#post376571 some bugs fixed. See updated info in downloads link.

i did download those firmware... i live in the midlands but when i search channels i just got 5 channels recieved and thats it... please help.. thanks

[cloudnineuk54]

i did download those firmware... i live in the midlands but when i search channels i just got 5 channels recieved and thats it... please help.. thanks

i may be wrong,but peeps will put it right,is there not a new n3 firmware to give viewing for a year,perhaps you need that,but im only guessing i dont know that box

[freshmen]

thanks, cloudnine my box is starview combo hd plus lan etc... im still struggling to search a cable channels... any idea...

[dvdjn]

8989

just loaded the newest file from here on my usb loaded it to my starview hd combo + scaned channels but 8989 after menu dont work. help needed thanks in advance

[dvdjn]

THIS IS FOR THE LAN, (STB WITH ETHERNET PORT), BOX ONLY THIS FILE WILL KILL A NON LAN BOX YOU HAVE BEEN WARNED AS THEY ARE NOT COMPATIBLE.

- 7Days EPG update every area.
- Update Scan/channel List menu issue.
- USB menu update.
- Video Output setting update ("HDMI + YPbPr + CVBS", "RGB SCART")
- Satellite scan update.

Firmware can be found here Digital Kaos - Downloads - Feb 09 Latest Starview Combo LAN Firmware

Readme:

THIS IS FOR LAN 1214 BOX


DO NOT LOAD THIS FILE ON A NON LAN BOX OR IT WILL KILL YOUR BOX YOU HAVE BEEN WARNED !!!!!!

NON LAN BOX IS THE BOX THAT DOES NOT HAVE A RS232 CONNECTOR ON THE BACK OF THE UNIT THIS WAS THE FIRST BATCH OF 500 SOLD !!!!


Load grooverider file on to your usb memory stick,make sure power is off on machine and insert the memory stick into the front usb socket
underneath the front flap.


Turn the HD Combo on.

From the main menu go to Utility and then press the right arrow button and select usb
from the right hand side, you will see the grooverider file press ok on it and make sure to select SW+ALL DATA UPDATE..

the machine will update and restart (don't pull your memory stick out until the machine has fully started up)
you now need to scan your channels,
so go to installation press the right arrow button again and go down to AUTO CABLE SEARCH
all you need to change here is the symbol rate.
The symbol rate determines your area for example ntl is 6887, the other numbers are 6952 for telecast and EXc&w.
When you have selected your area go to start scan.

once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "keyedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off just turn it on.

Then go to to your channels by exiting the menu and pressing ok..
Select a non FTA channel and leave it until a picture appears
PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE

Channel list..

all your channels are categorised by
pressing ok on your remote brings up the channel list but it will be in simple layout,
pressing the red button takes you to detail,
now if your list don't appear to be categorised you will need to press the SAT button on the remote and you need to select cable
at the bottom of the list this will then give you the categories,
to change each section you simply use your left or right arrow buttons




GOOD LUCK
GrOOvErIDer


For Sat set please look at end of readme Click Here


NOTE UPDATED FILES BELOW:

For areas in the UK that have changed over to N3 you need to use this CS firmware, please follow the readme : Digital Kaos - Downloads - Starview Combo LAN UK CS Firmware V1.00

For Ireland please use this firmware, (not applicable to Chorus areas): Digital Kaos - Downloads - Starview Combo LAN Ireland CS V1.00

downloaded the above file on my sv hd combo + scanned for channels but when i press 8989 dont work help needed thanks in advance

[tornado]

u press menu then 8989 and u have to do it fast

[trickey1]

Hi, as a newbe I have followed the above guide for the Lan version of the Starview HD Combo + and have to say that most of the channels work well however I can only get one HD channel which is E*SPHD, all of the others show on the channel list but only show a blank screen when selected, can anyone help or tell me what I have done wrong??

Thanks in advance

[trickey1]

Hi, new to all this can you tell me what the "updated files" are for Sat or Cable ??

[dvdjn]

u press menu then 8989 and u have to do it fast

thanks got it working

[ihoti2001]

yep....me too stuck with 'One of the 1st 500'
those dongles are becoming a myth and now i hope my box 'terminally breaks itself' with a ''FTA F'ware' so i can return it :-)

F**k me, how far does 500 boxes stretch? I have one of these too. Talk about bad luck, My FW is 4.04 but LDR is 0.01?? I thought is was mean to be 1.28 or something like that? Whats happening, the guy i bought the box from said it's all up to date!!!

[petendebs]

config file

Hi guys,

new to the group, but have been reading for dome time now, some great posts, and very informative.

I would like to know, how you get a config file??

I have read about the cccam stuff, and you load your config file, but I have scanned the net and can't find one that does anything for me....

Any suggestions??

Many Thanks

Pete