Starview HD Combo LAN & NON LAN STBs

[blizard442]

I took out my non lan box and put it in the atic when n3 kicked in hopeing for a fix somewhere down the line. Mine is one of the 1st 500 boxes without the ethernet. Is there anything out there to help me get it up and running again. I keep looking for updates and see the non lan side hasn't been updated since feb this year.
Cheers in advance
jtb

i don't think so mate. your box is unable to access the cable c/s server. so you've got no chance of finding a fix of some sort. but, correct me if i'm wrong i may have stumbled on a post once saying that you can use a dongle through the rs232 port allowing you to connect to the c/s server but i may be mistaken for another box.

[philynwa]

does anybody now of an internal pasword for starview hd combo

[blizard442]

does anybody now of an internal pasword for starview hd combo

to do what with?

[satsmo]

i don't think so mate. your box is unable to access the cable c/s server. so you've got no chance of finding a fix of some sort. but, correct me if i'm wrong i may have stumbled on a post once saying that you can use a dongle through the rs232 port allowing you to connect to the c/s server but i may be mistaken for another box.

Starview NON Lan boxes, (first 500 released to market), were supposed to have adapters issued but that never happened.

You may have been thinking of the Kryptview A750 with IConnector.

[philynwa]

to allow remote accses (c/s)

[blizard442]

to allow remote accses (c/s)

From the main menu go to Accessory and select Network.
Set Type to On, go down to CS Net and press ok.
Set Type to Ustream, go down to register and press ok.
After a few seconds Connection status should say connected.

Note that your box may have already done this after flashing but its best to check.

Then go to your channels by pressing exit a few times.
Select a non FTA channel and leave it until a picture appears.
Please note that it can take up to 5 minutes to update.

(you have flashed the box, right?)

[pitmaxbull]

Hi i have a starview combo hd with non lan only usb, i have laoded groovrider hd combo F3.50_1118.uad and boot _v0021 all good but when i try to put the carling update on for n3 it fails at 20% ANY IDEAS OR WHAT DO I DO.
THANKS
Pit

[nabeela]

starview combo lan

hi, i need the mac address for my starview combo lan, the mac address has gone to being 0000000000 and i need the cs net too. how can i put the mac address in? which software will help me with this?? can anyone help?

[obibatk]

Mac Address & CS Connection Issue

You need to reflash your box using the null cable and serial port method.
Search and download (HD-200_Download.exe) and (HD300N_SC_RS232_1013.bin) files from this site.
Follow the readme instructions included in the file.

Good luck

[brunowilliam]

my starview hd stop a lot well I am watch any scramble channel is my box fault our is like this

[pitmaxbull]

You need to reflash your box using the null cable and serial port method.
Search and download (HD-200_Download.exe) and (HD300N_SC_RS232_1013.bin) files from this site.
Follow the readme instructions included in the file.

Good luck

I tryed this with a none lan starview hd box and now its bricked, all i get is a green light on front no numbers etc

[youngie1]

hello all how do i get my sat working for the starview hd combo+ i have carling on it as the software do i need any thing else. i have looked and looked with still no idear please help. do i need another image ie grooverider or not. do i need cccam or not really stuck here thanks all

I tryed this with a none lan starview hd box and now its bricked, all i get is a green light on front no numbers etc

[brunowilliam]

my starview hd stop a lot well I am watch any scramble channel is my box fault our is like this my box is with lan port

[brunowilliam]

where can i find this file (HD300N_SC_RS232_1013.bin) plz

[brunowilliam]

my box freeze every 30 sec our 45 is starview hd comb is like this our my box is fault plz need help i got this box on 12/10/2010 i need to return if is fault