Starview the box USB missing channels etc

[YAHYA00]

Hi all just a update to my problem posted above I formmatted the USB drive as a FAT32 file system as I moticed it was formatted as FAT which is a 16 bit After that tried again putting v1.12 on to my box and worked great.

COULD YOU BE MORE PRACISE MINE COMES WITH THE SAME MESSAGE

[YAHYA00]

MINE IS THE SAME

COULD YOU BE MORE PRACISE MINE COMES WITH THE SAME MESSAGE COULD YOU TELL ME WHAT YOU DID PLEASE

[YAHYA00]

I DONT KNOW WHAT U MEAN COULD YOU TELL ME HOW YOU FORMATTED IT AND HOW YOU PUT ON NEW SOFTWARE/FIRMWARE

[hypersonic]

Starview 4 - The Box super USB

Yahyhoo m8
You format the USB stick on your PC using Format/file system Fat32 (not NTFS) - You can also use a portable Hard disk formatted to Fat32 - copy the bin file to the USB stick or HDD. switch off the SV4 - insert the USB device & switch on. The SV4 should find the device and allow you to update the firmware.
There are plenty of threads on DK to help you with this if you spend a little time browsing.
Best of luck

[blainey07]

Hi all

I have the starview super usb box and have lost bbc channels and others like nick junior 2 etc. Tried everything i.e factory default, reformatting (starting from scratch again) etc. I have the latest firmware and set the keycode in the secret menu to 'on' and everything you should do but this still does not pick up these channels. Any ideas?

Thanks in advance

[cactikid]

are you scanning from a direct feed from wall to box.

[cactikid]

I DONT KNOW WHAT U MEAN COULD YOU TELL ME HOW YOU FORMATTED IT AND HOW YOU PUT ON NEW SOFTWARE/FIRMWARE

post in lower case only remove caps,as you are shouting.

[hypersonic]

Hi all

I have the starview super usb box and have lost bbc channels and others like nick junior 2 etc. Tried everything i.e factory default, reformatting (starting from scratch again) etc. I have the latest firmware and set the keycode in the secret menu to 'on' and everything you should do but this still does not pick up these channels. Any ideas?

Thanks in advance

Are u using firmware 1.12 and are u on sly spts or sly movies when u put the keycode on ?

[81rick]

missing channels

was wondering if any1 can help ive got star view 4 and lastest software. Ive lost all channels except for "diva tv and playboy" everything else has gone. Ive done a rescan and done factory reset but still no luck can any one help ?

[cactikid]

everybody keeps telling us they have the latest do they,always better to say what is on box and where they are,now the bad news see if you are there if so bad news.
3.7Software is followed by ------- new cards then --------- Nag 3
3.7 Software is for VM boxes only NOT Starview ect


*Set to receive new cards = Assumption based on N3 stream being present

*Receiving new cards = Fact

*Note: info on this list is subject to change

Current areas on 3.7

- Aylesbury
- Barnsley
- Bedfordshire including Bedford Sandy, Biggleswade, Dunstable, Luton (Set to receive new cards)
- Bells Hill
- Bolton
- Bradford (Set to receive new cards)
- Brighton
- Cambridge
- Casltford (Set to receive new cards)
- Chesham
- Cheshire including Warrington, Widnes, Runcorn
- Chiltern Hills
- Cleethorpes
- Coventry
- Croxley Green
- Derbyshire (Set to receive new cards)
- Dorset including Bournemouth, Poole (Receiving new cards)
- Dunbartonshire in Scotland
- Dundee in Scotland
- Durham
- East Anglia
- Essex including Harlow (Romford, Ilford, Rainham receiving new cards)
- Falkirk in Scotland
- Fife in Scotland
- Gateshead
- Glasgow in Scotland
- Grimsby (Set to receive new cards)
- Halifax (Set to receive new cards)
- Hampshire including Gosport, Aldershot, Farnborough
- Harrogate
- Hartlepool
- Hertfordshire including Stevenage, Hemel Hempstead, Bishops Stortford Watford, Rickmansworth South Hertfordshire, (Hitchin, Letchworth, St Albans, Ware, Hertford, Hoddesdon, Cheshunt, receiving new cards)
- High Wycombe
- Horley
- Huddersfield (Receiving new cards)
- Humberside
- Immingham
- Keighley (Set to receive new cards)
- Kent including Swanley, Bexley, Ashford, Dartford, Dover (Receiving new cards)
- Kirklees including Dewsbury, Batley
- Lancashire including Chorley, Preston, Burnley, Nelson, Accrington, Colne, Blackburn
- Leamington Spa
- Leeds
- Leicestershire (Set to receive new cards)
- Lincolnshire (Set to receive new cards as part of Nottingham headend)
- Liverpool
- London 41050 including Harrow, Wembley, Lewisham, Hackney (East London, South London, Seven Kings, Hounslow receiving new cards)
- Lothian in Scotland including Edinburgh city
- Manchester including Swinton, Salford, Stretford, Stockport, Wigan
- Middlesbrough
- Middlesex including Staines, Enfield, (Northwood receiving new cards)
- Newcastle
- Newcastle-under-Lyme
- North & South Lanarkshire in Scotland
- North Shields
- Norwich (Set to receive new cards)
- Nottinghamshire (Set to receive new cards)
- Oldham
- Oxford
- Paisley in Scotland
- Peterborough
- Portsmouth
- Reading
- Rotherham
- Rugby
- Scun'thorpe
- Sheffield
- Solent (Set to receive new cards)
- Southampton (Receiving new cards)
- Southend-on-Sea
- South Humberside (Set to receive new cards as part of Nottingham headend)
- South Shields
- South Tyneside
- St. Helens
- Stockton-on-Tees
- Stoke-on-Trent
- Sunderland
- Surrey including Guildford, Woking, Frimley, Farnham, Camberley, Epsom, Croydon
- Sussex including Crawley (Receiving new cards)
- Swindon
- Teesside
- Tonbridge including Tonbridge wells, Edenbridge, Lower Surrey (Set to receive new cards)
- Uddingston in Scotland
- Wirral
- York


Areas switched over to Nagra 3

- Aylesbury
- Batley
- Chesham
- Chiltern Hills
- Dewsbury
- Harrogate
- Huddersfield (NTL parts only)
- Kirklees
- Leeds
- Rickmansworth
- South Hertfordshire
- St Albans (Excw parts only)
- Watford
- West Yorkshire (NTL parts only)
- York






01/12/09, 05:43 PM - last edited on 18/02/10, 05:52 PM

Virgin Media has started to send out new smartcards to its TV customers, currently we're sending them to customers in Watford, Seven Kings, Kirklees, Wessex-Poole and Ashford. The new smartcard is easy to swap with the old - find out how at Switching your Smart Card.

The new smartcard is important. It works differently to the old card, and uses newer technology which will form part of a range of exciting new digital TV services from 2010 and onwards, including more HD channels, new TV on demand features and of course we’re also working on integrating TiVo into our TV service too!

Customers in the Watford, Seven Kings, Kirklees, Wessex-Poole and Ashford should have already received their new cards (or will be recieving them soon) and it’s important your old card is swapped out as soon as possible. Over the next few days, in the regions listed, we’ll be turning off some of the older TV signals on our network so if you haven’t swapped the card yet, please do so as soon as you can to ensure an uninterrupted service.

If you are in the Watford, Seven Kings, Kirklees, Wessex-Poole or Ashford areas and think you need a new smartcard please head to Switching your Smart Card and check our frequently asked questions (FAQ).

If you’re not in one of the regions listed, don’t panic, everyone will be getting a new smartcard. We’ll be going around the country region by region as we upgrade our TV service, and we’ll be in touch by post when it’s your turn. In the meantime, don’t worry there won’t be any changes to your TV service until that time.

[81rick]

thanks cactikid . I live in watford does that mean im screwed basically? and my box will no longer work? is there any way i can make the box work?

thanks

[boomer39]

thanks cactikid . I live in watford does that mean im screwed basically? and my box will no longer work? is there any way i can make the box work?

thanks

if on nag3......no way, renee

[cactikid]

nagra3 was brought out to stop all boxes working,only providers box will work.

[johnnieboy_67]

STARVIEW 3 SUPER

Can anyone please help me as regards to the software v1.12.I'v downloaded it but when i try to open the (bin) file it is not allowing me to.Can anyone please tell me how to open file and also how to upload software to my starview 3 box,thanks in advance.

[smoggy]

Can anyone please help me as regards to the software v1.12.I'v downloaded it but when i try to open the (bin) file it is not allowing me to.Can anyone please tell me how to open file and also how to upload software to my starview 3 box,thanks in advance.

V1.12 is not for your box
if you have a starview 3 then you need firmware V8.04e Digital Kaos - Downloads - GTRom_Super_8.04e.exe