Starview box is working but i cant get any signal

[mcassrob]

Hi
I have a starview,The box.It works ok on my friends tv but when i connect it to mines it dos,nt get any signal at all.Ive tried everything but it is,nt working.Would be greatful for any help.Thx Futcher

[mark8393]

Hi
I have a starview,The box.It works ok on my friends tv but when i connect it to mines it dos,nt get any signal at all.Ive tried everything but it is,nt working.Would be greatful for any help.Thx Futcher

must be your cables, check your coax, splitters etc.

[larryoke]

Are you re-scanning when you get back to your house?
you may be in different sectors

[mcassrob]

Yes i have rescaned,,,when i check the signal strength their is nothing there.I have it connected with a splitter from my vbox to my tv and my star wiew to my tv,,,Im lost.

[mcassrob]

Hi Mark
Ive checked the cables over and over,,they are new and seem to be in good working order.

[larryoke]

take your v box out and connect the sv in it's place! I'm not sure how you have it connected but the way I would do it is to take the cable from the wall socket to the splitter then take 2 feeds from this 1 - sv & 1 - v box not the way you have it set up, try swopping the boxes over & come back with the results.

[phelo]

try one cable from wall no splitter straight to starview hope that works

[mcassrob]

Thanks for the info guys,,,i,ll give it another go when i get home from work this evening.

[mcassrob]

Hi
I connected the cable directly to my starview,I set the negra to TW,and switch the EMU on and install but i get nothing with TW.I tried installing with NTL and all the channels come but they are all locked .So its set at TW and installed through NTL.Im lost.

[hoosekey]

Hi
I have a starview,The box.It works ok on my friends tv but when i connect it to mines it dos,nt get any signal at all.Ive tried everything but it is,nt working.Would be greatful for any help.Thx Futcher

Hi. I'm in dundee and i've got the same problem. My mates is working and he lives in the same area. Tried factory reset and re-scan for channels, no joy. Tried different software versions, no joy also. I'm pulling my hair out here. Any ideas would be greatly appreciated.

Cheers

Tony

[cactikid]

did you factory reset first 0000 to delete,auto scan your provider from wall socket,correct provider will load channels to list,finished exit out,press menu1570,set default key press ok,and also switch emu to on and exit out,box should update in a min or 2.

[maca]

Hi. I'm in dundee and i've got the same problem. My mates is working and he lives in the same area. Tried factory reset and re-scan for channels, no joy. Tried different software versions, no joy also. I'm pulling my hair out here. Any ideas would be greatly appreciated.

Cheers

Tony

try a factory rescan
factory settings (0000)
press default key
auto scan
turn emu to on
exit out to tv and let the box update.

[hoosekey]

thanks maca58. had tried all that which didnt work. problem was, i wasnt aware of frimware vers 1.12. once new firmware was installed your solution sorted it. cheers again mate

[boomer39]

Hi
I connected the cable directly to my starview,I set the negra to TW,and switch the EMU on and install but i get nothing with TW.I tried installing with NTL and all the channels come but they are all locked .So its set at TW and installed through NTL.Im lost.

have you done , menu, 1570, etc??