starview

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • craggz
    Top Poster
    • Oct 2009
    • 115

    #1

    starview

    hi,yesterday starview boxes went down , ive got starview 5, and 3. reset the starview 5 no problems, but the starview 3 box super cant get any signal for chans.. as any one else has that problem///in falkirk area
  • issazubeir
    Newbie
    • Apr 2010
    • 1

    #2
    the box super usb

    am new to this i have a The box super usb is there any new software to unlock it thanks

    Comment

    • craggz
      Top Poster
      • Oct 2009
      • 115

      #3
      starview

      no new software will be out n3 is near, boxes will be useless, my starview 5 is still working for the moment. just my starview 3 box super has died

      Comment

      • craggz
        Top Poster
        • Oct 2009
        • 115

        #4
        changed my firmware from 802 to 804 my starview 3 super still no signal.... n3 is near ///falkirk area

        Comment

        • cactikid
          V.I.P. Member
          • Sep 2008
          • 12017

          #5
          no signal=is cable plugged into cable input or is there a breakdown in area,even on n3 you get a signal.
          have you done a factory reset and rescan on all providers also as some have changed.

          Comment

          • craggz
            Top Poster
            • Oct 2009
            • 115

            #6
            ive done all that ,its only the starview 3 box its toast. got starview 5 box aswell no probs with that.no faults in the area.. n3 i think, falkirk is next, but ive not got new smart card for vm

            Comment

            • boomer39
              DK Veteran
              • Dec 2008
              • 2818

              #7
              Originally posted by craggz
              ive done all that ,its only the starview 3 box its toast. got starview 5 box aswell no probs with that.no faults in the area.. n3 i think, falkirk is next, but ive not got new smart card for vm
              if your sv5 works it cant be n3 can it? have you tried using just the sv3 without sv5 in the loop? have you got a gen subbed box as well? if not you wont get a new card!!!
              YNWA..

              Comment

              • cactikid
                V.I.P. Member
                • Sep 2008
                • 12017

                #8
                if he has factory reset he could try reflashing again and see if it picks up channels in a scan,also note sometimes people plug coaxial into ant in when it should be cable input,if you dont get channels found maybe tuner problem.

                Comment

                • craggz
                  Top Poster
                  • Oct 2009
                  • 115

                  #9
                  ive tryed everything, plugs ,etc are in where they should be,recan still nothin. it could be a tuner problem?. ive got a gen subbed box..

                  Comment

                  • craggz
                    Top Poster
                    • Oct 2009
                    • 115

                    #10
                    got new smartcard in for vm box ..falkirk area ..n3

                    Comment

                    • boomer39
                      DK Veteran
                      • Dec 2008
                      • 2818

                      #11
                      Originally posted by craggz
                      got new smartcard in for vm box ..falkirk area ..n3
                      cheers, mate.. not long now then!!
                      YNWA..

                      Comment

                      • grovsey
                        Member
                        • Dec 2009
                        • 47

                        #12
                        hi i got a starview and a dbox and on my starview im getting no signal at all my dbox is working fine ??
                        i cant do nothing with this box as i say its showing no signal
                        im in st helens merseyside

                        Comment

                        Working...