SV6 set up help?

[003294]

Acoording to what Ive found to get SV6 set I need to do the following,

Menu, options, network, net applications, select type ustream (uk)

The problems I got is I go menu, options, network then instead of getting net applications I get network ip set up, sw download or home steam setup.

Any assistance or pointers greatly appreciated, first time I've seen this bit of kit, Oh and I've already got carling 1.0 on my usb plugged into the back

[satsmo]

But have you flashed the box with it?

[003294]

But have you flashed the box with it?

No, cos it says save db or save rom, not sure which one to do first?

[satsmo]

Switch the box off from the power. Plug in your USB stick and power the SV 6 back up.

Then follow from this line:

From the main menu go to Utility and then press the right arrow button and select usb.

of readme here Digital Kaos - Downloads - Starview 6 UK Firmware V1.00

[003294]

can i use the sv combo grooverider or is their a different grooverider for sv6, struggling to locate and d.load grooverider, help appreciated, can't seem to locate a place to d.load grooverider 1.01 which is what i need

[satsmo]

The link I posted is the file you require? Your supplier would be the best person to ask when it comes to the CS server set up as we cannot discuss how to connect to it, as it is against our forum rules to do so.

[003294]

no thats carling, i've got that, according to your post i need to load grooverider something i'm struggling to find and d.load, unless carling is the only file i need?

[satsmo]

Grooverider is the author's nic, Carling is the name of the bin file to differentiate between the UK & Ireland, so they are one in the same. You have the correct file for the SV6 as per the link above.

[003294]

I've highlighted the utility part and pressed 8989 but key edit does not appear, is their another no. combination I can try? or is it known for this to not work?

[003294]

I know why the 8989 is not working becuase software has not been loaded correctly, when I press ok to the 'carling file' the box freezes?

[badapple]

I know why the 8989 is not working becuase software has not been loaded correctly, when I press ok to the 'carling file' the box freezes?

Hi dude, see youre still struggling to get up and running.
If the box is new, you should load the FTA firmware FIRST and then update to the latest.
This way has workes for many people so give it a go m8.
FTA firmware here> http://www.4shared.com/badapple link/sharing.html

[003294]

Hi dude, see youre still struggling to get up and running.
If the box is new, you should load the FTA firmware FIRST and then update to the latest.
This way has workes for many people so give it a go m8.
FTA firmware here> http://www.4shared.com/badapple link/sharing.html

I've tried to put fta firmware 1.03 on and as soon as i highlight the file and press ok with remote the box freezes? is there not a loaded program like there was for starview one and 2 and i load it via serial cable?

according to system info this box has 1.02 UK C LDR 01 13 dec 14

[003294]

I've got to the problem, USB stick I was using was no good, must be in FAT 32 format, I loaded the firmware on with another USB and I know this time it worked cos I check on system info, thereafter scanned and made sure emulator is on, I then put in on a $ channel and as per instructions waited 5 min with still the same message, scrambled. Located in pure in leicester. Freeview channels are working fine though

[smirnoff_rules]

do u still need to turn emu on . on these boxes ? ie menu 1570 and yes

[003294]

do u still need to turn emu on . on these boxes ? ie menu 1570 and yes

When i checked emu was already on in the cas system, when i did '8989' in utility, but still showing scrambled? and yes I did make sure box is directly connected to the net.