Unstable - starview USB

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • satsmo
    V.I.P. Member
    • Jun 2008
    • 6397

    #16
    Did you load the logo file also? If so press menu, type 1570 on remote. Press default key. Exit to Sly Sports and let it update.

    Is your box connected to the direct feed without splitters?
    I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

    Comment

    • bazfresh
      Newbie
      • Sep 2008
      • 8

      #17
      noticed mine did this when i first got it, seems to have settled down now. when it crashes there is no need to reflash just turn box on and off and it is sound.

      use epg to flick through works a treat!!!

      Comment

      • tony_i
        DK Veteran
        • Oct 2008
        • 425

        #18
        satsmo - Tried your suggestion but still doing it. There's just the one feed into the back of the box, if that's what you're referring to?

        bazfresh - You're right about the epg. It's just annoying that it's not working 100%. Unfortunately I do have to reflash all the time - the on/off trick doesn't work for me.

        Comment

        • satsmo
          V.I.P. Member
          • Jun 2008
          • 6397

          #19
          Tony as you have tried all avenues I would advise sending it back to your supplier and ask for a replacement. Pain I know, but its not only firmware related according to your symptoms.
          I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

          Comment

          • ezop
            Member
            • Sep 2008
            • 79

            #20
            its a problem with all the sf4 usb's, mine does the same ..

            until a new firmware comes out to fix the issue i would suggest using the EPG insted of channel hopping

            Comment

            • satsmo
              V.I.P. Member
              • Jun 2008
              • 6397

              #21
              "All" wouldnt be the correct wording. The majority are fine some areas suffer due to the EPG set up, its been worked on at the moment. What provider and general area are you in?

              You asked for a replacement box from the supplier and got one as it was a faulty bootloader and you said it was working fine at the end of September? Are you having the same problems again, if so are you using an external HDD?
              Last edited by satsmo; 27 October, 2008, 18:54.
              I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

              Comment

              • tony_i
                DK Veteran
                • Oct 2008
                • 425

                #22
                Originally posted by satsmo
                "All" wouldnt be the correct wording. The majority are fine some areas suffer due to the EPG set up, its been worked on at the moment. What provider and general area are you in?

                You asked for a replacement box from the supplier and got one as it was a faulty bootloader and you said it was working fine at the end of September? Are you having the same problems again, if so are you using an external HDD?
                I assume this was directed to ezop?

                Comment

                • vrlika
                  Member
                  • Oct 2008
                  • 54

                  #23
                  I am getting woried now hearing all this about sv4 I am collecting mine this week hope I dont have problem with channel hoping etc.
                  cheers
                  Vu+Duo,1m Dish, 3 degree monoblock (13&16e), Zone 2 dish with quad lnb,Skybox F3

                  Comment

                  • loch lubnaig
                    Newbie
                    • Oct 2008
                    • 12

                    #24
                    have came across this a couple of times on my box where if you channel hop the screen is black if you rest on the channel for a few seconds the picture reappears if not flick up a channel then back it usually comes back on

                    Comment

                    • vrlika
                      Member
                      • Oct 2008
                      • 54

                      #25
                      Is this the only bug on box 'cos I can live with that ?
                      Vu+Duo,1m Dish, 3 degree monoblock (13&16e), Zone 2 dish with quad lnb,Skybox F3

                      Comment

                      • loch lubnaig
                        Newbie
                        • Oct 2008
                        • 12

                        #26
                        dont worry,this box is the business,you'll be well pleased,these are only minor problems bearing in mind its still only beta software,ENJOY !!!

                        Comment

                        • bazfresh
                          Newbie
                          • Sep 2008
                          • 8

                          #27
                          Originally posted by loch lubnaig
                          have came across this a couple of times on my box where if you channel hop the screen is black if you rest on the channel for a few seconds the picture reappears if not flick up a channel then back it usually comes back on
                          aye that works for me or if it crashes turn box on and off at plug or switch on back of box usually fixes it, not too much to worry about tho

                          Comment

                          • vrlika
                            Member
                            • Oct 2008
                            • 54

                            #28
                            nice one. I was hoping that would be the case minor bugs.My patience is running out three days to go for my box.
                            Vu+Duo,1m Dish, 3 degree monoblock (13&16e), Zone 2 dish with quad lnb,Skybox F3

                            Comment

                            • ezop
                              Member
                              • Sep 2008
                              • 79

                              #29
                              Originally posted by satsmo
                              "All" wouldnt be the correct wording. The majority are fine some areas suffer due to the EPG set up, its been worked on at the moment. What provider and general area are you in?
                              I live in the manchester area .. autoscan setup was/is TW as exNTL finds only a few channels.

                              I have 2 sf4 usb's bedroom running v1.01b and lounge running v1.02b and they both do the black screen when channel hopping

                              Originally posted by satsmo
                              You asked for a replacement box from the supplier and got one as it was a faulty bootloader and you said it was working fine at the end of September? Are you having the same problems again, if so are you using an external HDD?
                              I did get a replacement box the guys at wizard satellite were cool had no probs.
                              I can honestly say that i never noticed it at first because i didnt channel hop that much i always use the EPG (i find it easier to see whats on) and when it did/does do it 1570 fixes it .. I dont use an external HDD

                              come to think of it, it was the kids that brought it to my attention when they were channel hopping through the kids tv channels.

                              Comment

                              • satsmo
                                V.I.P. Member
                                • Jun 2008
                                • 6397

                                #30
                                Cheers ezop I can pass it on and see what the outcome is. TBH I am still waiting on the timer add on.
                                I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

                                Comment

                                Working...