SV4 think it's dead

[ukjarvis]

Hi im proberbly gonna get slated for this, I recieved a SV4 box because it had lost channels so I thought it might be best to flash with the latest software v1.12 any how followed instuctions and it got stuck at 0%, i waited and waited and waited but nothing so all I could do was to unplug it as it has frozen, unfortunatly when I did this I was aware that it proberbly wouldnt work which it didn't, is there a way to repair the box, there's no picture on screen and not numbers displayed on the box itself.

I accept im a tool and should of left it alone.

[ukjarvis]

Well regarding a fuse it's not a uk plug its a two pin version so unless I open the box up itsself dont know where it would be ??

[cactikid]

those 2 pin connections can be faulty if plugging into wall socket,i would use a connector,also noted switch at rear can be faulty,get someone to check it out and remember live circuits inside when powered on.

[nialler]

those 2 pin connections can be faulty if plugging into wall socket,i would use a connector,also noted switch at rear can be faulty,get someone to check it out and remember live circuits inside when powered on.

not a bad suggestion. i have fixed a number of these due to crappy power switches on the rear

[ukjarvis]

Thanks guys was a dodge power swictch on the back..... brill