Help Beginner needs help with Starview box

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Googley
    Newbie
    • Apr 2010
    • 18

    #1

    Help Beginner needs help with Starview box

    Hi, hope someone can help me with my Starview box. I have Virgin and in the Birmingham area. Not sure what model box but the serial no. is 61012076 so I am guessing its a 6 series.

    I dont know how to set it up, it has never been connected to a PC and now all the channels are gone. Have read some places thats its due to Virgin changes but now need to know if its possible to get the Starview box working again?

    Again help please?

    Thanks
  • boomer39
    DK Veteran
    • Dec 2008
    • 2818

    #2
    Originally posted by Googley
    Hi, hope someone can help me with my Starview box. I have Virgin and in the Birmingham area. Not sure what model box but the serial no. is 61012076 so I am guessing its a 6 series.

    I dont know how to set it up, it has never been connected to a PC and now all the channels are gone. Have read some places thats its due to Virgin changes but now need to know if its possible to get the Starview box working again?

    Again help please?

    Thanks
    if its never been connected to a pc, its boxes 1-5... use it as a doorstop....end of...
    YNWA..

    Comment

    • christhompson44
      Newbie
      • Sep 2010
      • 2

      #3
      if it's got a lan port and you have internet connection then you can get it working

      Comment

      • Googley
        Newbie
        • Apr 2010
        • 18

        #4
        I have checked the connections on the back of the box, they are as follows:
        1) Cable in and out
        2) Ant in and out (I know thats the aerial ones)
        3) S-Video
        4) Small 9 pin (5 top 4 bottom) connector - Is that it? Marked RS232. If this is it where do I get the connection cable from that goes into the PC and Box?????
        5) 3 usual audio coloured wires
        6) 2 scart connectors, 1 VCR 1 TV.

        Also managed to find out that on the bottom of the box is a barcode which states Starview SP61012076 (Would that mean its a 6 model)?.

        We have had it between 1 and 2 years so it shouldnt be so old.

        Can someone please help advise me on what to do next, sorry for being so useless but never done these boxes before I only usually mess with the PC or laptop as I know what I am doing there. Hopefully with your help at least once I have some guidance on doing it once I will be much more confident second time around!!!!

        Also we have kept our OLD Virgin card in their box and not the new updated one they sent us, oops its still in the envelope.

        Thanks very much
        Last edited by Googley; 3 October, 2010, 20:25. Reason: add text

        Comment

        • boomer39
          DK Veteran
          • Dec 2008
          • 2818

          #5
          doubt if it a sv6 . not been out that long.. check, menu, system info, this will tell you what f/ware is on box...
          putting new card in gen box will not affect the sv...
          think your sv is a bin bag job.....
          YNWA..

          Comment

          • Googley
            Newbie
            • Apr 2010
            • 18

            #6
            Thanks for that, I have checked the system info and it has given me the following:

            Starview API Ver 2.57e_E

            Bootver 7.0

            18 Aug 2006

            Does that now mean its a Starview 2???

            Thanks

            Comment

            • blizard442
              Top Poster +
              • Sep 2009
              • 203

              #7
              Originally posted by Googley
              Thanks for that, I have checked the system info and it has given me the following:

              Starview API Ver 2.57e_E

              Bootver 7.0

              18 Aug 2006

              Does that now mean its a Starview 2???

              Thanks
              looks like it should be used as a door mat...
              If You Like My Post -----------PRESS THAT THANKS BUTTON

              Comment

              • funghi
                Junior Member
                • Sep 2010
                • 20

                #8
                sounds like a 1 or 2 matee! their finished.

                Comment

                • super jumbe
                  V.I.P. Member
                  • Dec 2008
                  • 11610

                  #9
                  If I were you they belong to skip they are dead for good.

                  Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!

                  Did you know People will question all the good things they hear about you but believe all the bad without a second thought.

                  Note:
                  All information given is to be used for educational purposes only and should not be taken seriously.

                  Comment

                  • Tech54
                    Member
                    • Sep 2010
                    • 72

                    #10
                    Originally posted by Googley
                    I have checked the connections on the back of the box, they are as follows:
                    1) Cable in and out
                    2) Ant in and out (I know thats the aerial ones)
                    3) S-Video
                    4) Small 9 pin (5 top 4 bottom) connector - Is that it? Marked RS232. If this is it where do I get the connection cable from that goes into the PC and Box?????
                    5) 3 usual audio coloured wires
                    6) 2 scart connectors, 1 VCR 1 TV.

                    Also managed to find out that on the bottom of the box is a barcode which states Starview SP61012076 (Would that mean its a 6 model)?.

                    We have had it between 1 and 2 years so it shouldnt be so old.

                    Can someone please help advise me on what to do next, sorry for being so useless but never done these boxes before I only usually mess with the PC or laptop as I know what I am doing there. Hopefully with your help at least once I have some guidance on doing it once I will be much more confident second time around!!!!

                    Also we have kept our OLD Virgin card in their box and not the new updated one they sent us, oops its still in the envelope.

                    Thanks very much


                    Your box is a SV 1,2 or 3.
                    If theres no Lan port then it will not work. SV's have USB after Version 3 and versions 6 and 7 also have Lan for internet connection.

                    Comment

                    • thewizardofodds
                      DK Veteran
                      • Nov 2008
                      • 924

                      #11
                      its worse than that their dead jim , dead jim!

                      Comment

                      • kevlinks
                        Top Poster
                        • Sep 2010
                        • 152

                        #12
                        buy new box........

                        Originally posted by Googley
                        Hi, hope someone can help me with my Starview box. I have Virgin and in the Birmingham area. Not sure what model box but the serial no. is 61012076 so I am guessing its a 6 series.

                        I dont know how to set it up, it has never been connected to a PC and now all the channels are gone. Have read some places thats its due to Virgin changes but now need to know if its possible to get the Starview box working again?

                        Again help please?

                        Thanks
                        Options for your old box:-

                        1.Christmas gift for your ex-girlfriend/boyfriend/in-laws/work m8/ly-pop lady.....ect

                        2.Send it to a third world country...i.e Africa/Afghanistan/Iraq/Liverpool....

                        3.Use as a book shelf end weight.

                        4.Come down to our local throw a dead cable box competition and win yourself a prize.....1st prize is a new kva780.....

                        5.Donate it to world research in antique electrical equipment.

                        If anybody else wants to add any other uses please feel free as i'm feeling a bit...
                        Last edited by kevlinks; 12 October, 2010, 15:54.

                        Comment

                        • gmb45
                          Admin Assistant
                          • Nov 2008
                          • 7538

                          #13
                          Originally posted by kevlinks
                          2.Send it to a third world country...i.e Africa/Afghanistan/Iraq/Liverpool....
                          liverpool third world country, nice one m8
                          support mountain resue

                          support digital-kaos here


                          forum rules

                          no keygens or torrents to be posted no autodata discussions

                          pish pt walkers


                          Comment

                          • kevlinks
                            Top Poster
                            • Sep 2010
                            • 152

                            #14
                            Originally posted by gmb45
                            liverpool third world country, nice one m8
                            Its all good m8..........mufc 10/11

                            Comment

                            • Googley
                              Newbie
                              • Apr 2010
                              • 18

                              #15
                              Thanks for all those lovely replies, I will leave it at the moment as dont fancy climbing on top of the cupboard BUT what do I replace it with???? Anything working yet with Nagra or is a sat dish any good??

                              Thanks

                              Comment

                              Working...