Starview 7-Carling 1.03

[EAMO 2]

same iv downloaded and installed nothing working

Use this firmware
Digital Kaos - Downloads - Starview 7 Carling V1.04
Have a read of this
Digital Kaos - Downloads - starview 7 Firmware & Instructions
If you have problem post back with exact details

[jatt]

how to install carling 1.04 on sv7

[EAMO 2]

how to install carling 1.04 on sv7

Read this
Digital Kaos - Downloads - starview 7 Firmware & Instructions
use this firmwarehttp

http://www.digital-kaos.co.uk/forums/downloads/starview/23/starview-7-carling-v1-04-1469/

[shinuraj]

hi i am a newbie.. i downloaded carling 1.03 and i selected usb and i can see the file carling 1.03 file there but when i pressed oK on my remote nothing is happening.. any idea how to install it... please help

[cactikid]

read above posts as links are there,welcome to dk.

http://www.digital-kaos.co.uk/forums/f2/new-forums-how-make-your-first-post-couple-other-helpful-tips-30279/

Digital Kaos - Cable & Satellite Forum

[EAMO 2]

hi i am a newbie.. i downloaded carling 1.03 and i selected usb and i can see the file carling 1.03 file there but when i pressed oK on my remote nothing is happening.. any idea how to install it... please help

After you select USB you need to Hi-lite Carling 1.03 before you
press OK. You would be better to use latest firmware for SV7
Digital Kaos - Downloads - Starview 7 Carling V1.04

[martina30]

I have carling 1.03 firmware on my starview 7, it has scanned all the channels but im only able to watch freeview channels. Do I need to get another firmware? many thanks

[smirnoff_rules]

is your box connected to the internet

[EAMO 2]

I have carling 1.03 firmware on my starview 7, it has scanned all the channels but im only able to watch freeview channels. Do I need to get another firmware? many thanks

SV7 should work with Carling 1.03 if you went thru set-up steps
correctly; select U-stream, turn EMU on, etc.
Would be easier for you to flash box with latest firmware
Digital Kaos - Downloads - Starview 7 Carling V1.04
All the settings are preset for UK on 1.04 firmware, you may need
to restart router & box for box to connect to internet
As said above make sure router is connected box-Lan adaptor

[bonesarsenal]

Digital Kaos - Downloads - Starview 7 Carling 1.03
Have a read of these instructions;
Digital Kaos - Downloads - starview 7 Firmware & Instructions

brilliant thanks

[mickeypro99]

i have dowloaded carling 1 03 and turned usstream on and its still not connecting ! is it ok to use an ethernet cable to connect . its still blank in the ip address in fact they r all blank . i av rebooted , done a factory reset , even tried carling 1 04 still says not connected
please help me guys .

[EAMO 2]

i have dowloaded carling 1 03 and turned usstream on and its still not connecting ! is it ok to use an ethernet cable to connect . its still blank in the ip address in fact they r all blank . i av rebooted , done a factory reset , even tried carling 1 04 still says not connected
please help me guys .

Ethernet cable is fine. Make sure it's OK & connected properly to
router & adaptor to RS232 port on box. If you're having problems
connecting best to stick with Carling 1.03 firmware. Try this one
Digital Kaos - Downloads - Starview 7 Carling 1.03
Have a read thru tutorial
Digital Kaos - Downloads - starview 7 Firmware & Instructions
With 1.03 f/ware you can access settings to make sure they are
all correct. With 1.04 they are pre-set. When you have box working you can upgrade to 1.04
Before you do anything look in UTILITY--SYST INFO & make sure f/ware you flashed is listed.
You could also turn off box & router, reboot router then reboot
box. Often does the trick

[mickeypro99]

thanks mate ! still not got any ip adress listed tho . im stumped

[EAMO 2]

thanks mate ! still not got any ip adress listed tho . im stumped

If answer to other thread doesn't help there's an easier way.
If you have X-box or other console connected to internet copy down all IP,MAC, etc from console. Disconnect console from the
router & enter values in SV7. Don't forget to SAVE values.
Reboot box & it should be OK. Console can then be reconnected
to router & auto-reconnected to internet

[mickeypro99]

If answer to other thread doesn't help there's an easier way.
If you have X-box or other console connected to internet copy down all IP,MAC, etc from console. Disconnect console from the
router & enter values in SV7. Don't forget to SAVE values.
Reboot box & it should be OK. Console can then be reconnected
to router & auto-reconnected to internet

thanks for ur help eamo , i'l take it to my mates house wher he has ps3 online
cheers