starview 7 stuck on C113

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • super jumbe
    V.I.P. Member
    • Dec 2008
    • 11610

    #1

    starview 7 stuck on C113

    Hi Mates
    I have a starview 7 and it?s stuck on C113, I have tried pressing TV/AV on remotes but nothing looks to be working, any help I will appreciate thanks in advance. I could not have not have happened on Christmas Eve.

    Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!

    Did you know People will question all the good things they hear about you but believe all the bad without a second thought.

    Note:
    All information given is to be used for educational purposes only and should not be taken seriously.
  • satsmo
    V.I.P. Member
    • Jun 2008
    • 6397

    #2
    1. Switch box on wait for a few seconds until booting has finished.
    2. Press MENU on remote
    3. Press DOWN ARROW BUTTON once
    4. Press RIGHT ARROW BUTTON once
    5. Press DOWN ARROW BUTTON twice
    6. Press OK BUTTON twice

    The box should reboot and the display should come back on.
    I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

    Comment

    • super jumbe
      V.I.P. Member
      • Dec 2008
      • 11610

      #3
      Hi Satsmo happy Christmas,
      Thanks for your help but nothing happening still stuck at C113 and the Green and Red lights both stuck on, any other way I could try. Thanks again.


      Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!

      Did you know People will question all the good things they hear about you but believe all the bad without a second thought.

      Note:
      All information given is to be used for educational purposes only and should not be taken seriously.

      Comment

      • satsmo
        V.I.P. Member
        • Jun 2008
        • 6397

        #4
        And a Happy Christmas to you too.

        You may have to try it a few times. If it does not work after a couple of tries, keep pressing the OK button at the end of the reset and it may work. If not try changing the scart to the AV side and see if you can view the menu.

        You will need to reflash it after this process, I would use the latest 1.04 bin.

        The only alternate option if above doesn't work is to send it back to your supplier. Something that is hard at the best of times never mind it been the Christmas period.
        Last edited by satsmo; 24 December, 2010, 22:26.
        I refuse to answer that question on the grounds that I don't know the answer. - Douglas Adams

        Comment

        • EAMO 2
          DK Veteran
          • Nov 2008
          • 1201

          #5
          Originally posted by super jumbe
          Hi Satsmo happy Christmas,
          Thanks for your help but nothing happening still stuck at C113 and the Green and Red lights both stuck on, any other way I could try. Thanks again.


          Any luck with box Jumbe. I assume you tried changing channels
          with CH+/CH- buttons on front of box

          Comment

          • cactikid
            V.I.P. Member
            • Sep 2008
            • 12017

            #6
            did you try and power off at back and also remove lan and see if it changes after its switched back on?

            Comment

            • dvdjn
              Junior Member
              • Apr 2010
              • 31

              #7
              stuck on c113

              i have tried all of the above still stuck on c113 with green and red light on and remote not functioning.thi is on my starview 6. can i flash it.

              Comment

              • mike01
                Newbie
                • Mar 2011
                • 8

                #8
                hi my box is the same i have tried everything to get it of c113 at the start does any1 know a fix for this cheers

                Comment

                • eileen
                  Top Poster
                  • Aug 2010
                  • 157

                  #9
                  try it on a different tv with different scart

                  Comment

                  • mike01
                    Newbie
                    • Mar 2011
                    • 8

                    #10
                    i have tried it on 2 tvs with in both scarts and still nothing, when i boot the box up it says c113 and has a green and red light is there any way to reset the box with a rs232 port

                    Comment

                    Working...