FAO (e)Smokers

[Bann32]

This question is to those that have successfully moved from analogue/normal cigs.

My and the ecig have a disatorus history, but im ready for the next round now... I can smoke it ok, my problems come when I try to add other factors to the mix.

So I put my eCig, in my eNic once I get the right size batteries, I am then able to pass through, I assume, I aint got that far yet. Does anything else need to be connected (or not as the case may be) to my pc? or do I just pass through and thats it?

[tshirtman]

I'm sorry but you totally lost me, whats an eNic?,
as for a pass through, all you need is the pass through battery that will fit a mini USB cable, and hook it up to what ever power supply your using, PC, car cig lighter, anything that will output power via USB,
All a pass through does is supply power from a different source,
as I explained here: post #24 - http://www.digital-kaos.co.uk/forums...ml#post1341954, it's very easy and cheap(about ?10) to make your own pass through without the need for a battery, if you can use a soldering iron you should have no problems, it will make things easier if you have access to a Dremel, but not essential.

[Bann32]

sorry Enic was the carrying case (wrong size) I bought, is Pcc the right term?

[tshirtman]

I think I know what your asking, you can put your Batteries in to the PCC (portable charger case) while the PCC is charging and charge both at the same time,
it will just take a bit longer for the PCC to charge,
when you say case was wrong size I presume the batteries wont fit case properly, are the batteries too small or too big for case.