If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Anyways, if you're talking about splitting the feed that comes to your home with a neighbouring property, you should consider their will be an insertion loss of around 3dB from the splitter and you WILL need to use 2 line isolators (on each output of the splitter) to prevent damage from the VM network (in case they have a technical issue) and of course to isolate the mains between each house.
Once you have the isolated feeds, you can additionally split them between boxes and modems, but again you need to consider the insertion loss..
If you're on a good strong feed, it should work fine..
(if not, you may need to pay a dodgy installer to up your signal if they can)
Comment