If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Got a prima boiler heating seems to be working ok but can't get hot water boiler quite hot as well ?
thanks in advance
Not an expert but been told boilers work exactly as the car sensors work, find all the sensors on boilers and clean them with wire sponge till you see the bit of copper or silver shining replace all clean sensors bob the uncle…..
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:
All information given is to be used for educational purposes only and should not be taken seriously.
If the Heating is working, but hot water is not working, then its the diverter valve,. u should be able to get to it,
How to test,.... Set it to Heating run heating ,.. turn off the boiler ,. and open up get to the diverter valve and now open check where the valve is take pic or by touch,
close it up,. select Hot water only, turn off the boiler,.. and check if the valve is moved, if not ,.. u know its faulty
>>>>Your combi boiler diverter valve is a valve that opens and closes to provide heat to the radiators or to heat your water. The diverter valve will always give priority to your hot water, so if you turn your heating on, and then a hot tap, it will heat the water to the tap first.<<<<<
Comment