jailbrake

[griff]

i just jailbroke my iphone4 with snowbreeze 2.7.3 and all went well except when it was finished i couldnt get no phone signal !! is there something i have to do when it is all restored ??

[griff]

it was on 4.3.3 and the bandbase was thr unlockable one

[fijiman]

What baseband are you on...?
You may not need to unlock your baseband..but you will need to install Ultrasn0w 1.2.3....once in installed power off iphone-press and hold power button until "slide to power off" appears..let it power down ...power up all should be good....you must use this method to reBoot

[griff]

On 4.10.01 baseband. Will I need to use ultrasnow to jailbrake or install it on the iPhone once it is jailbroke ?

[fijiman]

aah....your on 4.10.01....don't bother with ultrasn0w...this only works unlockable basebands....try Settings>General>Reset>Reset All Settings

[griff]

the same thing happened on a 3gs i done ?

[fijiman]

Are using the most current jailbreaking software available..? your options are small...wipe iPhone again,reinstall 4.3.3....check you have good,stable signal not jailbroken....jailbreak again, trying a different jailbreak method.

[mickydibble]

i just jailbroke my iphone4 with snowbreeze 2.7.3 and all went well except when it was finished i couldnt get no phone signal !! is there something i have to do when it is all restored ??

What network,are u using the original sim to activate,turn aeroplane mode on and off,

[martiboy]

Had the very same problam doing my iphone 4. First time i done it i had no signal. The problam was that when i done the jailbreak i ticked the button to hacktivate it. Once i restored it and done the second jailbreak i left the hacktivate unticked and the problam was fixed

[griff]

yeah i did tick the box mate will try it again with out the tick cheers mate