IPhone 4s screen change

[localhero38]

Hi all I'm changing screen on iPhone I get to the 6 screws with washers on the bezel. Unfortunately they have become rounded the screwdriver I used was rubbish has anyone had this issue & any ideas of how to undo them? Thanks

Sent from my SM-N9005 using Tapatalk

[ominimicu]

no need to reomove them jsut loosen them...try some pliers..or if still no work..just pry the old screen out with full strenght...they ll loosen afterwards

[localhero38]

Will I cause any more damage to the casing if I do this??👍 Thanks

Sent from my SM-N9005 using Tapatalk

[ominimicu]

to teh casing no...maybe to teh display..but you have to cahnge it anyway

[localhero38]

👍 will give it ago later

Sent from my SM-N9005 using Tapatalk

[R20VT]

no need to reomove them jsut loosen them...try some pliers..or if still no work..just pry the old screen out with full strenght...they ll loosen afterwards

loosen them half turn of screwdriver and try to buy a good screwdriver PH000 i have wiha picofinish 261p PH000x40

[localhero38]

Sorted thanks 👍

Sent from my SM-N9005 using Tapatalk