Still not working after new digitizer???

[wiseman]

Changed the digitizer on my Iphone 3g 16g, and it still wants to have a mind of its own, doing all the usual symptoms that would make you think it was the digitizer faulty,

you need to touch a lower part of the screen if you want to open something higher etc...

new motherboard? or can it be fixed??

[wiseman]

help......:-(

[wiseman]

anyone?????????

[Canker_Canison]

Did this ever get wet?

Check around the connectors for the LCD & Digitizer for any sign of contamination or white marks. If you find some, clean it down with a toothbrush & some IPA (Isopropyl alcohol). Allow it to completely dry before putting the connectors back in.

[biffo1]

did you replace just the digitizer or lcd Screen as well ive repaired a few iphones all with success , if you have the same problem as u have now that u had before maybe its not the digitizer ?
are the 3 ribbons connected correctly

[plasma533]

carried out a calibration of the touchscreen?

[wiseman]

carried out a calibration of the touchscreen?

no will try this

[wiseman]

carried out a calibration of the touchscreen?

how do you do this?

[Canker_Canison]

As far as I'm aware there is no calibration function for the Iphone.

If you are getting exactly the same problem I would be looking for damaged pins on the board connector or restoring the firmware.

[wiseman]

As far as I'm aware there is no calibration function for the Iphone.

If you are getting exactly the same problem I would be looking for damaged pins on the board connector or restoring the firmware.

Tried the firmware upgrade twice on the phone now to no success, it appears to be ribbon connectors through out the iphone, i tried cleaning up the connections to the digitizer with alcohol... im really stuck , think it needs a new motherboard

[fijiman]

It's time to take a hammer to it ......I feeling your frustration...

[wiseman]

It's time to take a hammer to it ......I feeling your frustration...

~~~~in pain in the tits

[Canker_Canison]

When you put it back together, did the ribbon ever get caught?

Even the slightest knick or hard crease in a ribbon can ~~~~ it.

[wiseman]

When you put it back together, did the ribbon ever get caught?

Even the slightest knick or hard crease in a ribbon can ~~~~ it.

i very much doubt i did , was extremlly carefull, and anyway its still doing the exact same problem i had to begin with