New Super Mario Bros

[dell_xps]

Try this Neogamma, it installs as a channel, put it on your sd card in the root, and launch it just like you have installed the other wads.Now go back to the main menu and it should be a channel now, saves running from SD card.
It should be a silverish channel, then go into options and enable 002 fix to on.
Not 100% sure if this is the right loader, let me know if it's not, I have that much $hite on my SD card .....



If the above doesnt work, here are some wads I have installed, please only try these if you have backed up your nand, I take no blame if your Wii goes (*)(*) up !!! BE CAREFUL PEEPS.

[tomhick024]

Poo's to Nintendo anyway, tried everythink i could to my ability.
Tried to fix with with wiiscrubber but when trying to replace main.dol, says not enough space, replaced he one in partition'1' and burnt to dvd but still no joy.
My buddy soft modded my wii on V4.2e for me, thinks it is cios 249 revision 14, dont no much about softmodding really.

One last question, if i buy the original, will it play or do any harm to my Wii?

Also thanks again to
'dell_xps' for his help and links.
Cheers
T

[jonnyluvrod]

Poo's to Nintendo anyway, tried everythink i could to my ability.
Tried to fix with with wiiscrubber but when trying to replace main.dol, says not enough space, replaced he one in partition'1' and burnt to dvd but still no joy.
My buddy soft modded my wii on V4.2e for me, thinks it is cios 249 revision 14, dont no much about softmodding really.

One last question, if i buy the original, will it play or do any harm to my Wii?

Also thanks again to
'dell_xps' for his help and links.
Cheers
T

Use wiiflow....

Use wfbs manager on your pc to put new super mario bros iso file on your usb flash drive.

Put wiiflo on your sd card and put it the sd slot of your wii.

Put your usb flash drive into the bottom slot of your wii at the back.

Load the Homebrew channel and select wiiflow 249.

Worked a treat for me...

Pm me if you want more help mate...

[bashirgray]

I have just a regular soft mod with homebrew and backuploader will it work for me this attachment

[dell_xps]

I have just a regular soft mod with homebrew and backuploader will it work for me this attachment

Use wad manager to install it m8, so yes!

[tomhick024]

Use wiiflow....

Use wfbs manager on your pc to put new super mario bros iso file on your usb flash drive.

Put wiiflo on your sd card and put it the sd slot of your wii.

Put your usb flash drive into the bottom slot of your wii at the back.

Load the Homebrew channel and select wiiflow 249.

Worked a treat for me...

Pm me if you want more help mate...

Cheers man, only have 4G usb drive at the moment, prob purchase on over the next week or two and will have another go off it!
thanks
T

[jonnyluvrod]

Cheers man, only have 4G usb drive at the moment, prob purchase on over the next week or two and will have another go off it!
thanks
T

4GB usb flash will be fine with New Super Mario Bros as the iso file is under 1GB.

Don't forget, give us a shout if you want help m8...

[jake]

this worked for me Wiiso pre patched download is only 380mb but extracts to 4.5gb
runs from dvd-r disc

my wii is
4.1e pal
drivekey v4
hbc
run it via neogamma R8 beta 12

[tomhick024]

this worked for me Wiiso pre patched download is only 380mb but extracts to 4.5gb
runs from dvd-r disc

my wii is
4.1e pal
drivekey v4
hbc
run it via neogamma R8 beta 12

Those links on that site seem to be dead mate!!

[tomhick024]

Use wiiflow....

Use wfbs manager on your pc to put new super mario bros iso file on your usb flash drive.

Put wiiflo on your sd card and put it the sd slot of your wii.

Put your usb flash drive into the bottom slot of your wii at the back.

Load the Homebrew channel and select wiiflow 249.

Worked a treat for me...

Pm me if you want more help mate...

Hey mate, thanks for help so far!
I d/l wfbs and sent iso to flash drive.
downloaded wiiflo and extracted, put main wiiflo folder into root of sd but couldnt find 249 in homebrew, is there something need to install from wiiflow to hbc to find this '249' thingy!
Thanks
T

[tango]

the patch in this thread didnt work for me
what i did find tho is the iso version that says fixed by ninja works ok if you change your wii settings to 60hz instead of 50hz.

[ruudvandan]

Try this Neogamma, it installs as a channel, put it on your sd card in the root, and launch it just like you have installed the other wads.Now go back to the main menu and it should be a channel now, saves running from SD card.
It should be a silverish channel, then go into options and enable 002 fix to on.
Not 100% sure if this is the right loader, let me know if it's not, I have that much $hite on my SD card .....



If the above doesnt work, here are some wads I have installed, please only try these if you have backed up your nand, I take no blame if your Wii goes (*)(*) up !!! BE CAREFUL PEEPS.

dell you are an absolute hero, your help has been immense.

By the way, what are those wad files in the wad.rar for?

[jonnyluvrod]

Hey mate, thanks for help so far!
I d/l wfbs and sent iso to flash drive.
downloaded wiiflo and extracted, put main wiiflo folder into root of sd but couldnt find 249 in homebrew, is there something need to install from wiiflow to hbc to find this '249' thingy!
Thanks
T

I've put what you need on the root of your SD card here to download pal.

Just unrar it and copy it to the root of your SD, put SD in your Wii then run Homebrew channel.

You should get the option to select wiiflow 222 or 249, load 249 and your New Super Mario should run fine.

Make sure your Usb Flash Drive is in the BOTTOM slot of your Wii.

Let us know how you get on...

[tomhick024]

Buddy,
thanks a mill or all your help, this morning I found a compressed version, downloaded in an hour or two and its working on disk!
My 4 year old is testing at the moment, as some are supposed to be freezing on world 2! Playing on neogama version 7, IOS 249, will let all know how it goes.
Thanks again
T

[yamar1]

Try this Neogamma, it installs as a channel, put it on your sd card in the root, and launch it just like you have installed the other wads.Now go back to the main menu and it should be a channel now, saves running from SD card.
It should be a silverish channel, then go into options and enable 002 fix to on.
Not 100% sure if this is the right loader, let me know if it's not, I have that much $hite on my SD card .....



If the above doesnt work, here are some wads I have installed, please only try these if you have backed up your nand, I take no blame if your Wii goes (*)(*) up !!! BE CAREFUL PEEPS.

Hi dell, is neogamma to load the game from a disk or hard drive?