Confused USB Loaders

[stopmotion]

Hey,

This is My Confusion ... I'll try and make it as Simple as I can ...

My Wii is 4.2e Softmodded ... Because the Drive is the Newer
Style it apparently wont Take Dvdr ... So of course I went straight
To Usb as My Loader,

For the Last Week I have been Using Uloader and Configurable Usb Loader ...
Uloader was My First One but I cant seem to add Covers as the
Add Png is Not "Clickable" ... So I tried Configurable Usb Loader ...
That Worked a Treat ... Downloaded Every Cover and Ran the Game,

So Heres my Problem ... Up until Today I always used a 8GB
Flash stick ... Not a Hard Drive ... And It Worked very Well apart from the
Size ... Today I had a 500GB Seagate Usb Drive arrive ... I
Formatted it to Fat32 and Made it the Primary Partition ...
I then Boot up WBFS Manager ... Load the Drive but it says it needs
Formatting ... So I click Format and It says it cant,

So I went back and Reformatted it to Fat32 but this Time as
a Logical Drive rather than Primary ... Booted up WBFS Manager
and Voila it formatted it a Treat,

So I move about 6 ISO's on to Test ... I load up Configurable Usb Loader and It see's the ISO's ...
It also downloaded the Covers for Me, ... BUT ... When I Press "A" to play ...
It just Hangs ... BUT ... If I go to Uloader ... They play fine? ... Am i missing
Something simple Here ... Why did Configurable Usb Loader Work with a
Flash Stick but not the USB Seagate 500GB?
And Why are the "Add PNG" Not useable on Uloader?

Hope Someone can Help ... I'm 99% Sure that The Hard Drive Should
Be Fat32 Primary ... Not Logical? ... Man I'm confused

Thanks For Reading and Hope it makes some sense

[stopmotion]

Well I alwas think Its a Good Idea If You solve the Problem ... But
In this Case I never ... I prefer Configuration USB Loader But this was solved by just going to Uloader and the "Add PNG" Was there ?? ... So Uloader if My First Choice ... Thanks for Viewing too

[Evasion-Lv6]

it shouldn't be doing that inless it's a problematic iso aka peppa pig or metroid prime trillogy

I use wiiflow as it lets you hav different options for different games and saves them so you don't have to tweak each time you play.

i.e. keep setting it to pal or ntsc or 002 error fix etc

but if you have games that hang and run in other usb loaders fine it's because you were using the wrong settings to boot in the usbloader that hanged.

[stopmotion]

Thanks ... I did Notice them settings ... Strange though I never had to change them before the HD ... Thanks again

[ck-ok]

stopmotion when the curser is hovering over the game you want to add a cover for press home button and select add png and push + to download