HOW TO UPDATE Lt+1.1 to Lt+1.9

[snedz1967]

Hi need help updating my xbox360 i payed to get it flashed because its a liton and i have a via card and drivers removed need a step ny step guide how to update got copy of the drive key??? so should be easy enough ???

step ny step would be great ???

[janobi]

Hi need help updating my xbox360 i payed to get it flashed because its a liton and i have a via card and drivers removed need a step ny step guide how to update got copy of the drive key??? so should be easy enough ???

step ny step would be great ???

Firstly, do you not have your original files?

You will need the latest JF, the tutorial is in the documentation folder. You will need the probe V3 too.

[snedz1967]

Firstly, do you not have your original files?

You will need the latest JF, the tutorial is in the documentation folder. You will need the probe V3 too.

iv got dummy.key and aw the files and got a via card so just need steps how to update junglelasher tutorial is confuzing

[janobi]

iv got dummy.key and aw the files and got a via card so just need steps how to update junglelasher tutorial is confuzing

Ok if you have the original files its easy.

Open JF, set your original files as the target, and ensure its correct key. Flash as normal, depending on drive.

Take the update off live.

Reconnect the drive to JF, and use your dummy.bin as the source, and LT+1.9 as target, spoof key to target, and flash as normal.

[teajunkie]

Sorry thats wrong!

If you have already applied the new dash update
1. open your previously dumped firmware e.g. lite-OFW.bin as source
2. select the new liteon firmware manually (New firmware is 02510c LT+1.9)
You will find this firmware in the folder "Liteon phat/post 13141" (unless you have extracted all to root of firmware folder)

WARNING !!!
if you flash the LT+1.9 for say a 93450c and you have applied the new dash update then you will be flagged for incorrect drive revision. (you will be flagged)

If you dont have the new dash then update then you need to update your dash before you flash otherwise your drive will be wiped when you do accept the new dash update.

[janobi]

Sorry thats wrong!

If you have already applied the new dash update
1. open your previously dumped firmware e.g. lite-OFW.bin as source
2. select the new liteon firmware manually (New firmware is 02510c LT+1.9)
You will find this firmware in the folder "Liteon phat/post 13141" (unless you have extracted all to root of firmware folder)

WARNING !!!
if you flash the LT+1.9 for say a 93450c and you have applied the new dash update then you will be flagged for incorrect drive revision. (you will be flagged)

If you dont have the new dash then update then you need to update your dash before you flash otherwise your drive will be wiped when you do accept the new dash update.

Its ok, I did it from memory, I didnt think it was entirely correct .

[cunny]

Follow Ubergeeks Superb Guide Here

Liteon DG-16D2S 02510C (NEW VERSION) - Step-By-Step Guide (DUMMY.BIN for DVD Key) - Team Xecuter

But you will have to update the dashboard before hand (if you aint allready)

[snedz1967]

thanks but looking to use xbox console to power drive? and how to pt it into vendor mode??

[cunny]

You can use the xbox as power source yes, but its not advised. If you dont have the correct key you will need to obtain it. Also vendor mode is sent after the drive has been erased