problem with new dashboard

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • georgebourne
    Newbie
    • Jun 2010
    • 5

    #1

    problem with new dashboard

    Got new dashboard on xbox360 also 3.0 flash and ran games through abx1.6 but now I?m getting this disc is not supported. all the older games and kinects work perfect but the new ones like saints row won?t work it tries to read the disc and the picture of saints row shows in the reading disc but still getting this disc is not supported. also sometimes it might say clean disc
    And yes I am using a ihas 244 b DVD writer I have heard about some bin file that was put in the new dashboard don?t know how true this is
    Any help would be much appreciated
  • KDC
    Top Poster
    • Sep 2009
    • 177

    #2
    Are you sure you have it flashed with latest lt+ 3.0 firmware? Sounds like you may have older firmware on drive.
    Neil Francis Lennon: "The only way a title is tainted is if you've won it and you cheated to win it."

    Comment

    • georgebourne
      Newbie
      • Jun 2010
      • 5

      #3
      dashboard

      yes got the firmware on i read some where that new dash has a bin file put in it for the AP25 but now much more about it

      Comment

      • KDC
        Top Poster
        • Sep 2009
        • 177

        #4
        Originally posted by georgebourne
        yes got the firmware on i read some where that new dash has a bin file put in it for the AP25 but now much more about it
        Yes but dae.bin data changes on new dash should'nt be an issue with lt+ 3.0. All you should have to do is run iso through latest abgx which will patch the topology files and reburn.
        Neil Francis Lennon: "The only way a title is tainted is if you've won it and you cheated to win it."

        Comment

        • georgebourne
          Newbie
          • Jun 2010
          • 5

          #5
          dashboard

          patch the topology files and reburnt done all above


          thanks by the way for your replys its much appreciated
          also using verbatim mkm-001 or mkm-003 discs
          money going down drain

          Comment

          • ezzda1
            Top Poster
            • Jul 2009
            • 172

            #6
            try installing it to the hdd first,
            if it doesn't install, test the disk with kprobe2 and check it burned correctly, chances are it didn't.
            Kprobe Liteon Burn Quality Testing Tool - Team Xecuter

            test guidelines

            XGD3 Quality Test Guidelines - Team Xecuter

            if your test shows the disk isn't within the parameters play with the imageburn settings.

            tips for imageburn settings.

            GENERAL XGD3 - MKM003 (MIS) Settings & Burn Guide as conducted by the author of IMGBURN - Team Xecuter

            Comment

            • martiboy
              DK Veteran
              • Nov 2008
              • 541

              #7
              Originally posted by georgebourne
              patch the topology files and reburnt done all above


              thanks by the way for your replys its much appreciated
              also using verbatim mkm-001 or mkm-003 discs
              money going down drain
              You need to recheck your fw on your drive. It sounds like you dont have the latest fw loaded. If you have your jf log could you post it. Also what drive are you trying to play them on
              sigpic

              Comment

              • djjwdubz
                DK Veteran
                • Dec 2008
                • 1011

                #8
                try this, abgx don't work for me. http://www.digital-kaos.co.uk/forums...atches-249106/

                Comment

                Working...