D4S Winbond chip.

[DAVE466]

I have the winbond chip on my slim lite on D4S.

If i buy an unlocked genuine pcb and flash with my key and firmware etc and lock with jf, will i be able to unlock it again with jf for future flashes?

Cheers in advance.

[cunny]

Liteon DG-16D4S - Unlocked Replacement PCB - ModTraders.co.uk

Do you have a faulty Liteon DG-16D4S DVD in your Xbox 360 ? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled ?

TX have done it again with this custom made replacement PCB. Fits all DG-16D4S drive versions and allows you to reprogram your firmware to the board and then to set it to write protect to secure against any accidental firmware corruption / erasing.

Fits all Liteon DG-16D4S Drives
Fully compatible with 9504, 0225, 0401 and 1071 fw revisions
Write Protect enable / disable feature
Simply swap out the old board with your new board and you are good to go !
Easily programmable using the X360USB PRO or compatible SATA.

[DAVE466]

My drive is locked mate so can only read my firmware from it and i dont fancy doing the kamikaze on it.

[DAVE466]

i was looking at buying this one mate.

http://www.ebay.co.uk/itm/Xbox-360-s...item27c99a17ed

[cunny]

Ok they look like stock pcb so they will still need unlocked when updates come out. So depending on spi to methods used.

If you get a winbond the drilling part would be done for you then a case of unlocking it. Same with mxic.

Personally I'd get a tx 1.1 as they have the switch for locking unlocking on the outside of the drive making it easier

Sent from my GT-I9300 using Tapatalk 2