Liteon help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lango09
    Newbie
    • Apr 2009
    • 7

    #1

    Liteon help

    Hi i wanted to have a go at flashing my liteon drive and dont have a clue all i have is my pc and 360 and sata cable. which kit is best to buy and where from bearing in mind i carnt solder.and is there a step by step guide many thx to anyone that can help
  • cunny
    V.I.P. Member
    • Jan 2009
    • 4915

    #2
    i bought the connectivity kit v3 lite then bought the probe for getting the key off the liteon, works great i also bought a pci sata card for them.

    All in all it cost me about ?40
    sigpic

    "Make it idiot proof and someone will make a better idiot."

    Comment

    • lango09
      Newbie
      • Apr 2009
      • 7

      #3
      thx alot but where do i buy the kit from and is there a step by step guide for flashing ?

      Comment

      • thecat666
        Newbie
        • Jan 2009
        • 7

        #4
        try kanection they have a ck3 bundle for under ?36,you will also find a few guides on this site.the jungle flasher works fine with most chipsets. if no drive detected then make sure you have installed the PortIO32.dll,most say they cant see their drive but all they have to do is install xbox360 I/0 device drivers.hope this helps
        Last edited by thecat666; 27 April, 2009, 16:32.

        Comment

        • cunny
          V.I.P. Member
          • Jan 2009
          • 4915

          #5
          jungleflasher guide covers them all, as for chipsets get a VIA VT 6421 PCI card but beware of the vt freeze, i use jungleflasher until i come to erase/write to the drive, i then use dosflash for that.
          Last edited by cunny; 27 April, 2009, 21:58.
          sigpic

          "Make it idiot proof and someone will make a better idiot."

          Comment

          • wozzo
            Top Poster
            • Jun 2008
            • 198

            #6
            Via 6421 with the Via drivers uninstalled = No freeze.

            The portio driver that comes with jungleflasher is all that's needed to controll the VIA 6421.

            Comment

            • cunny
              V.I.P. Member
              • Jan 2009
              • 4915

              #7
              Thats true but i found this method quite easy and Jungleflsher has bricked 1 drive on me so i stick to what i know works well.
              sigpic

              "Make it idiot proof and someone will make a better idiot."

              Comment

              • wonderer
                Junior Member
                • Apr 2009
                • 27

                #8
                CK3 and try using the iprep via usb to firmware flash, more reliable than jungleflasher

                Comment

                Working...