samsung drive problem

[cunny]

Do you haver the original firmware, if not your screwed.
Does the drive eject?

In jungleflasher, go to mtk flash32 tab
With the drive hooked up, do the following:

Click sammy unlock, follow on screen promts, this will prob fail on the 3rd stage, if so, you need to power cycle the drive, then click
intro/device id, it will tell you to power cycle the drive, so this then it should go into vendor mode. Flash the drive with the formware then.

If all above fails and you have the original firmware, you can send me the drive and firmwre an i will sort it out for you.

[jman0110]

I finally got it. I really dont know what the issue was, but I kept trying and maybe did something slightly different before, but I just kept forcing it to try and do what I needed and eventually it allowed me. Anyway, thanks for all your help.

[cunny]

glad to hear it, you know where the thanks button is