help needed with 1175 slim drive pls

[dave11674]

hi guys

i recently picked up a slim
its got a 1175 drive in it
no biggie

i believe i have to change the drive board yes ?

if this is the case can any1 point me in the right direction as to what i must do to be able to flash this and play my games

can you supply a link for a good reseller of the replacement pcb's

also is it live safe ?
if its not live safe there is no point as this if for my son
i have RGH chips in
i have various tools
maximus lizard
and so on

any help greatly appreciated

thanks

dave

[cunny]

Your going to have to glitch the console to obtain DVD key and FCRT.bin

Then you just flash a replacement PCB

Xecuter LTU2 Replacement PCB Hitachi DLN10N / Liteon DG-16D5S USA CANADA

Thanks

[dave11674]

top man cunny i thought you would come to the rescue

is it going to be live safe tho thats teh question

after i jtag it ill remove all traces of rgh chip and wiring and .........

hmm wait i may just rgh its ass
no need to do drive then is there

dave

[cunny]

top man cunny i thought you would come to the rescue

is it going to be live safe tho thats teh question

after i jtag it ill remove all traces of rgh chip and wiring and .........

hmm wait i may just rgh its ass
no need to do drive then is there

dave

No. I had 1 come to pre xmas an it was glitched by blakey on tx, did good job an boot times were fantastic.

If you glitch you always got link to play on anyway

An yes, all upto date fw is as live safe there is

Sent from my GT-P5110 using Tapatalk HD

[dave11674]

hmmm

think ill just RGH its ass n sell it

thanks for your pointers mate

dave

so basically to clear this thread up in case some1 else comes searching for info on the same topic

you can do these drives but you need the replacement LTU board

rgh your machine and get teh required files
flash your replacement board with the relevant firmware
leave RGH or remove rgh and flash back to stock and away you go

correct me if im wrong here cunny mate

thanks

dave

[cunny]

You dont need to flash stock fw as orig pcb will have it.

You only need nand dump an cpu key to retrieve files from nand.

Once you have them, remove glitch, replace pcb an away you go, insert orig pcb to update dadh as normal

If you prefer glitch, leave glitch in as usual

You got it pretty much in a nutshell m8

Id glitch these suckers or look at a demon (dual nand)

Sent from my GT-P5110 using Tapatalk HD

[dave11674]

hi mate
wondering if you can help me here
same console

im trying to glitch it
got 2 x cr3 lites here
ive installed both but neither is making the glitch noise from teh chip n the fan dont flutter when glitching

any ideas ?
im using alternate cpu reset point Dblue wire about 37cm long
just no reset glitch xtal noise !!

any ideas ?
pics to follow of my install
ignore the first chip thats stick to the motherboard

LK2 is short
all rest open
set to slim and on norm
flashed chip with 2-3 to try get me going

dave

[dave11674]

its a standar V1 corona
ive just checked under the cpu heat sink
all tracks are there

dave

[dave11674]

right mate

ive just removed LK2 which i believe is for on board xtal and corona Mb.s
i soldered up my own xtal like for the early mobos

will let this try glitch for a while and se what happns

still cant hear that xtal frequency tho when it glitches !!

dave


ps i put stock flash back on and it booted up just fine

reflashed EEc back to it and tryign 4_3 timing