Team Xecuter's NEW LT CLIP

[killersla]

OK allot of people have been waiting for this one and it is nearly here. Team xecuter have released there final pictures for the brand new LT clip for all liteon 8 serirs drives V2 and 9 series drives.

Currently the only way to flash these drives was via the mra hack or using a lt switch.

MRA hack involved making a few cuts on the boards to break the circuit board and using a probe v2 to read and write to the drive then you would have to repair the cuts with conductive glue and then your done.

Or using the lt switch which involved also making the cuts but soldering a small pcb to the dvd drive in order to dump the drive and write to it etc etc.

Now team xecuter have announced the new LT clip this is aimed and the beginner in mind and all that you are required to do is make the cuts on the board and then fit the clip to the board and thats it your done very easy to use.

It has allot of very good features on the clip to make sure your cuts are right etc etc.

For a the full low down on the clip and some pictures to druel over please look a the offical team xecuter web site forum.

LT Clip + LT Switch v2 - Final Images - Team Xecuter

This is just fantanstic work from these guys

[cunny]

This is a good release, especially for people with no experience doing these drives/soldering ect. IT has built in continuity testing function, press the button, green good, red bad, if green just fit to pcb straight away