hitachi 47 bit of help?

[killersla]

hello hoping someone coul dhelp with this one. I have a hitachi 47 i am using the latest jungle flasher and windows vista 64bit i am using a via sata card with driver removed.

The hitachi shows up fine on teh hitachi tab as a 47 i send mode b and that is fine aswell. Now i go to use the ram upload method to dump the drive and i get this error

Mode-B Done!
Dumping f/w of Hitachi 0046/0047 by Ram Upload Method over Port IO
UnLocked!
Ram Upload - Execute Failed

now in the JF tut it says to use mode select to dump the drive but that optio is greyed out for me any ideas why?

so the only other method is classic so i dump using classic and get the ofw but i get no option to auto load ixtreme so i load and spoof key over but again i go to flash ixtreme and get same error!!!

tried going on the JF irc but its down i cant log on any ideas would eb great.

[killersla]

problem solved

[cgscott]

I knew what it was but i also knew when you fixed it you wouldnt share it with anyone .

Well done on that

[killersla]

sorry for not sharing it i didnt really have time but i will now but before i do please could you tell me what you think the problem was?

[cgscott]

I got this error using the rear port on the via sata card.
I used the internal sata port.
Also i dont uninstall via drivers. I do all my liteon flashing through dos.

[killersla]

i had drivers removed and using the end port which i have done many hitachi drives on but this one wasnt playing.

So i tried using the other port but still no joy.

So i put drivers back and used win api and used the mode select method. It took me a couple of tries but got there in the end.

I hate hitachi drives