E80 after kinect sports update

[DAVE466]

Console has benq drive with lt on it as i havn't got around to updating to lt+ yet.

I updated the dash via kinect adventures a couple of weeks ago.

Just put kinect sports in console and done an update and it is now giving me an e80 error

How do i go about fixing it?

Many thanks and i realise its xmas day but would appreciate any help.

MANY XMAS EVERYONE WHO READS.

[DAVE466]

Just left console on with e80 error whilst posting on here. Finsihed posting and turned console off and back on and now i have 3 red lights. Eh!!!

Just looked at secondry error code and got this 4142

4142 Error in the "Digital Backbone" (CPU/GPU/RAM), this is usually caused by a cold solder joint between the GPU and the mainboard.

Is this just the 3 red light fix needed?

[smirnoff_rules]

unplug everything and stand up vertically and try again

[DAVE466]

unplug everything and stand up vertically and try again

No joy mate.

[smirnoff_rules]

u can try the rap it up in a towel and ten it up for ten minutes trick , with no hardrive or video cable in and then let it cool for a few miutes and try again

[cunny]

E80: Dashboard Error - Wrong LDV version in NAND Flash: This is in new dashboard. You have the update but haven't R3T6 resistor. You can:
-Downgrade to old dashboard, solder back the resistor and then update your xbox
-If you have CPU Key, get current NAND Flash image and fix LDV (just add 1 up to latest kernel). (See error 1100)

I'd contact m$ if under warrenty

[DAVE466]

E80: Dashboard Error - Wrong LDV version in NAND Flash: This is in new dashboard. You have the update but haven't R3T6 resistor. You can:
-Downgrade to old dashboard, solder back the resistor and then update your xbox
-If you have CPU Key, get current NAND Flash image and fix LDV (just add 1 up to latest kernel). (See error 1100)

I'd contact m$ if under warrenty

Yeah just been trawling around different websites mate and came up with the same solution as what you say.

How would i go about doing the above methods that yu have mentioned?

Just opened her up and found that the r3t6 resister is in place and securely connected but have noticed that the U6T1 is missing.

Just to let you know that this xbox hadn't prviosuly had the kinect dashboard, i was getting confused as to which one had the dash and it is my other one.

[DAVE466]

Can anybody help or is this xbox now a big brick??

[cunny]

I would probably go onto Team xecuter's forums and see if anyone there can help?