can I recover liteon drive?

[m9g]

Bugger!!!!!!!!!

Erased firmware and something happended and had to restart pc and now JF wont detect liteon drive, cant even open and close the tray with ck3

hheeelllppppppppppp please

M9G

[m9g]

ok found dos tut so will give it a go

[cunny]

Sounds like you not removed VIA Drivers. Remove these before flashing a liteon

[ron292001]

your posting this on the wrong site


Team Xecuter - Rockin' the Box Since 2002

[cunny]

your posting this on the wrong site


Team Xecuter - Rockin' the Box Since 2002

For your information we have a good bunch here that are quite experienced with the XBOX 360. This erased drive is really easy to sort out.

Most of us are members of TX and other sites concerning the 360.

[ron292001]

Really?

Nothing wrong with posting TX site its the best place for info on the xbox360,

Man City Rule....

[

[m9g]

Sounds like you not removed VIA Drivers. Remove these before flashing a liteon

So even though I have erased the flash I can still flash it with JF?

Just tried the dos tut to and when run dosflash the drive isnt being seen

M9G

[cunny]

Ok do this

Remove drivers from system 32 folder/drivers (Follow tuts on that)

Open jf with the drive powered OFF
Prep fw
Back to mtk Tab
Select same port that it bricked on
Send vendor/device id
Power ON the drive.
It should then be there with flash status of 0x72

[ron292001]

That hurts cunny... Below the belt tactics!!!

[m9g]

sorry ron but have you anything interesting to say to help me fix my liteon? apart from throw in the bin. I use DK all the time and find everyone, well most members very helpful

Cuuny thanks for help, i dont have via drivers, nothing showing in device manager

Tried rest of intructions you sent and i just get device failed message.

I actually flashed this drive yesterday fine and spoofed another key to try in my 360, went to put it back and everything ok until in mtk i clicked erase and pc froze, had to restart and now drive doesnt show. I guess its bricked btu i here its possible to get back

Regards

M9G

[cunny]

Its not bricked m8, liteon drives are hard to brick.

If you use team viewer pm me the details and will take a look

[ron292001]

sorry ron but have you anything interesting to say to help me fix my liteon?

If you look at my first post you will see i gave you the no1 site on problems with xbox360s?

If you choose to ignore my post thats up to you

I'm not saying people like cunny aren?t right or dont know what they are talking about cos they clearly do

I just gave you the best site on xbox 360s.

[cunny]

It looks like a chipset issue to me. As your not using a VIA 6421 card ( i have told you in the past to purchase 1 ) then there is nothing more we can do. All for ?8 and your issues will cease.

@ Ron. There is no harm to post link to TX. I am a active member on there also. I have learn allot off Team X and Team Jungle.

[m9g]

One on order, never needed one in the past and have flashed a few drives, taken yuor advice and one on its way.

Thanks

[m9g]

Just wondering if there is anything i've over looked.

For example, should I have the original files i.e dummy, identify, inquiry, key and serial in maybe the firmware folder?

or is the intro/device id built into JF?

Before trying to run the intro/device id, in firmware tool 32 I put the original dummy file in the top, LTPlus-748v1.1 in the bottom box and spoofed the key to create a lite_cfw and saved this in the firmware folder as if doing a normal flash.

Is this correct for running the intro/device id?

What cables do i need connecting to the ck3? at the moment I have the sata cable connected, the power cable and the usb cables plugged in, do i need all three to run the intro/device id?


Just trying to make sure everything is the correct setup for running intro

Regards