Edimax 1206u print server

[nightjock]

Was uploading new firmware on this print server, had a power cut during process now server is bricked. Anyone know if it is possible to put firmware back on and if so how, any help or suggestions would be greatly appreciated. Lan light comes on but not status or ready lights so unable to access server on network.

[caveman_nige]

well a power outage during a firmware flash to any device is basically terminal.. You can ask the manufacturers i guess, but these things cost ?30 tops to buy new so you have to figure is it worth banging you head against a wall to fix... personally bud i would chuck it....