small home network help

[snakeman]

hi iv got a bt homehub 5 (router 1)
in it i have dvr and a hdmi network sender and a lead from lan to a router in workshop in to lan port (router 2)
in router 2 i have 1 computer via ethernet and one hdmi network receiver but when i try to get on the wifi on the router 2 it says i have no internet but the computer thats plug in to router 2 has internet any one shed some light on this

was thinking of doing router 1 to network switch to wifi access point

any advice welcome
and thanks

[jakesman]

ok mine is not the same but might steer u in a direction , mine go like this :
internet provider pluged in to wan port of firts router , wifi settings is done and dhcp is setup all working , from router 1 ( ip 192.168.0.1 )i have a lan cable that go into a second wifi router in a difrent spot , wifi settings match router 1 100% ssid and password (so wifi devices just connect no need for second password ect...) but router 2 (192.18.10.1)DHCP is Disabled u dont want router 2 handing out IP addresses that is the job of router 1 , . plug router 1 in pc and do settings and remove it then plug router 2 in pc and do setting and connect the whole system and report back , and google a bit

btw u plug router 1 lan cable into router 2 any port NOT into the wan port