Please help me I change my Epson sx130 in sx 121

[pistib]

hello,
I havea Epson sx130 printer and I play with program:

Aftar I play with Waste ink pad counter:

For now all was OK but after I dump printer eeprom:

I make backup:

Then I RESTORE and I broke eeprom contents!
After my windows see my printer like Epson tx121 (logic) and***8220;Waste ink***8221;led is On
Normal my printer not function with tx121 driver
In atached file, I add some image about my work.

Please help me!

[Canker_Canison]

Why were you messing around with the eeprom?

These are the instructions for the SX125 which is the program I think you used..

Reset instructions for SX125:

• Install printer if not already installed.
• Download and extract attached file into a folder on your hard drive.
• Run 'AdjProg.exe' and click 'Accept' on the splash screen then click on 'Select' at the top.
• From the pull down boxes, select 'Epson Stylus TX121' for 'Model Name' and 'ESP' for 'Destination', click 'OK'.
• Click 'Particular adjustment mode' then from the '---- Maintenance ----' section, select 'Waste ink pad counter' then click 'OK'.
• Click 'Check' on the bottom right, this will query the printer and give information of ink shots and so on.
• Tick the two boxes on the left, 'Main Pad Counter' and 'FL Box Counter', then click 'Initialize'.
• It should come up with a message abut restarting your printer, do it!

At no point did it tell you to mess with the eeprom. All the instructions that I've had with WIC utilities state 'never to enter any other menu's\options as you could brick your printer'

I have no idea how to fix your problem.

[pistib]

I understand better what I had to do, but I wanted to see what they can do with the program and I thought I was sure if I dump, and backup EEPROM. Unfortunately I was wrong. That's my fault. However, the described by you goes well - to me at least it worked, but I could not refrain from experiments, now pay the price. Perhaps if I find a program dedicated to SX130, I could restore EEPROM ....
Thanks for your answer.

[tbezzina]

I was given a printer to fix with the same problem. The user did the same thing. not even a backup. Did you ever managed to solve the problem ?

thanks
Trevor

I understand better what I had to do, but I wanted to see what they can do with the program and I thought I was sure if I dump, and backup EEPROM. Unfortunately I was wrong. That's my fault. However, the described by you goes well - to me at least it worked, but I could not refrain from experiments, now pay the price. Perhaps if I find a program dedicated to SX130, I could restore EEPROM ....
Thanks for your answer.