netgear wireless router

[antnik]

hi all, since i installed a netgear router model
wgr614 v9
my bit torrent status light only goes to yellow and not the usual green ? can some 1 tell me how to config it . not sure if its the firewall or something to do with port fowarding
thanks antnik

[maca]

have a look here m8 Guide to Open or Forward Ports for Utorrent and Azureus BitTorrent Clients | LostInTechnology
hope it helps you out..

[antnik]

hi maca58.
im having problems with stage 3. cant seam to get it to work .do i put my ip address or the one it states. also do i have to put http and www. ?
thanks antnik

[antnik]

sorry im using bit torrnado if that helps

[ruudvandan]

the router login paage are different for every manufacturer. netgear usually use: http://www.routerlogin.net

[unadkat]

sorry im using bit torrnado if that helps

dude

click start > run > cmd > ipconfig /all

Now look for default gateway... This is the IP address for your router

Open your browser and tap in the ip address.

you will now get a pop up asking for username and password.

and yes the reason u have a Nat error is because you have not forwarded your Ports correctly and also if i was you i would use Utorrent mate as that has a port checker.. which means that it will tell you wether they been forwarded correctly or not.


Enjoy

[ardgearoma]

netgear login

to be able to use routerlogin.net the companion software has to be installed.

ipconfig/all in cmd. whatever the gateway ip i.e 192.168.0.1

type it to your browser. you should be able to login to your config page using default username and password.