little beastie
So apart from the stock ones that have the login credentials in the admin guide don't u know how or a software i can use to unlock.
-
....Say it again, So apart from the stock ones that have the login credentials in the admin guide don't u know how or a software i can use to unlock.
-
@nanakomeah:
that is exactly right. It is only recently that I became aware of the root password that would allow access to, and the unlock of, the Rogers variant of the W35. Basically, any cellular ISP that provides the Ericsson W35 usually set them up with their own passwords.
westofanywhereComment
-
I'd appreciate any pointers or tips re: what settings to save or replace if I unlock my Rogers branded Ericsson W35 using the previously noted instructions.. I ended service with Rogers and want to use the hub as a mifi type device when traveling in the US. I think I'd opt for a service that uses AT&T's network. As a side note, the hub as it is works with Fido's service. I just changed the APN to one of Fido's and it worked. (Roger's owns Fido) Do you think it will work as it is (just change to AT&T APN) or will I need to unlock it?Comment
-
Hello all - nice to find this thread!
I have the Bell's Ericsson W35 Data & Voice Terminal.
I did a firmware upgrade to version w35-006-R12C003.arc
After the upgrade, it seems that the router have been locked.
I am trying to connect through the web interface with password 'user' and I am getting the following message :
-Enter password to access personalization options.
-Password: user
- 'The system database cannot be accessed right now, since it is locked. Please wait and retry later. Press back and correct the error.'
The same through telnet.
some specs:
Before Upgrade:
Product Id:KRC 101 1467/14 R2B
Boot Loader: CXC 172 7029 R1A (Dec 9 2008)
Application Software: CXC 172 7031 R13B (Nov 18 2010)
My upgrade was with w35-006-R12C003.arc firmware.
Any suggestions?Comment
-
this is from ericssonw35.com, can you ask Rogers to provide you with their original firmware file?
Important
Attn: Bell, Rogers & Telstra Customers
Using this firmware will corrupt your W35's software and cause the warranty to be void. Please contact your carrier for software updates.
(i) Please Note: Firmware upgrades are done at your own risk.
(ii) A reboot before upgrading is recommended
(ii) If your current firmware revision does not appear in the list above then it is highly likely you have unique firmware from your carrier, if this is the case upgrading using the above firmware may cause your unit to become inoperable. Contact your carrier for a software upgrade file.
(iv) WLAN needs to be turned off to conserve memory during the upgrade.
(v) Files do not need to be uncompressed.Comment
-
I found an interesting thread wiht the root user and password.
Rocket Hub a.k.a Ericsson W35 Official Rogers Unlo... - Page 6 - Rogers Community
Hope this helps unlock the W35.Comment
-
Interesting thread but i dont understand
How can i get my ericsson w35 from zain Ghana unlocked ?Comment
-
am still asking if anyone has a success story about unlockng
this ericsson w35 routerComment
-
format a flash drive ext2, make rw directoy & put into w35
open metasploit-framework console
samba symlink directory transvers
use auxiliary/admin/smb/samba_symlink_traversal
set RHOST 192.168.1.1
set SMBSHARE your_share
set SMBTARGET rw_dir/rootfs
exploit
add nat port on web interface and don't close.
create portforward router-cleanup.sh and staticroutes files with only this line
cd /;rwwipe files
copy 3 files to smb://192.168.1.1/your_share/rw_dir/rootfs/tmp/
go to navigator and refresh nat page (F5)
oooppp database error !!!!
wait 15 seconds, unplug ac & replug.
unbranded and root with default root passwrd, feb.07
but sierra MC8790V still locked :-(
my operator passwd file, metasploit faster than john :-p
root:$1$85W4UCwy$4rTH.lqYhFkdmjrbEq8Rr.:0:0:root:/root:/bin/shLast edited by tr3ce13; 18 August, 2015, 08:02.Comment
-
Yes, very easy for the Rogers version...
root password is:
R0ger5
Log into the CLI, SSH on 22
Enter this command:
rwclean files
Wait 2-3 minutes, then power cycle..
New root password is:
feb.07
W35 wasn't SIM locked, just firmware locked..
Rogers' anyways
@tr3ce13 I may try this on a Bell one in a few days
Is the directory in the ext2 flash drive, 'rw' or 'rw_dir' ? I see your further instructions have 'rw_dir' in the path.
Also might try using ShellShock to do this... Unfortunately it has been a while since I played with the W35, and my Linux skills aren't that high, but worth a try right?Comment
-
Any dir with rw permissions, change name as you wantYes, very easy for the Rogers version...
Is the directory in the ext2 flash drive, 'rw' or 'rw_dir' ? I see your further instructions have 'rw_dir' in the path.
Also might try using ShellShock to do this... Unfortunately it has been a while since I played with the W35, and my Linux skills aren't that high, but worth a try right?Comment
-
So great seniors on this wonderful thread, pls for novices like myself who don't have an idea as to how these command editing work, pls how can we go about unlocking the w35Comment
-
I see the commands alright but I don't know to go about it, pls helpComment
Comment