If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I am sorry but what you are asking cannot be discussed in great detail on this forum, What i will say is if you have the ET9500 then comparing that to an F3 would be smilar to comparing a reliant robin (F3) to a Rolls Royce (ET9500)
It will do everything you need and a 1000 times more when you read through a few of the guides in the Enigma2 section/Dreambox Section
Thanks, sorry one more thing. Is the set up exactly the same then with the dreambox ?
The only difference is on the Xtrend you will load images Via USB similar to the F3 everything else is done via Telnet and FTP exactly the same as a dreambox so all the guides apply apart from how to flash the firmware
Comment