humax freesat pvr

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ssttaagg
    Member
    • Feb 2010
    • 71

    #1

    humax freesat pvr

    very time i turn on my box it asks me if i want to retune. can this be turned off at all. or is it a fault with the box.
  • allycoops
    V.I.P. Member
    • Feb 2008
    • 1075

    #2
    Try This Mate if you have one of the following models,

    just noticed you said freesat and not freeview. see if this option is there in yours
    F2-1001T
    F2-1011T
    F2-FOXT
    DV-1000T
    PVR-8000T
    PVR-9200T
    PVR-9200T/B
    PVR-9200T/S
    PBR-9200TBX
    PVR-9150T
    PVR-9300T
    PVR-9300T/500

    When re-tuning the Humax equipment it is recommended that a Default Setting Installation is completed rather than an Automatic Search.

    Warning: A Default Setting Installation restores the Humax factory default settings. Any previous user configured data will be removed and have to be entered again. This includes Favourites, Subtitles and Screen Ratio Settings. The PIN will also return to 0000.

    To perform a Default Setting Installation please read the user manual or follow the instructions below:

    Press the MENU button.
    Select Installation using the up/down arrow buttons and press the OK button.
    Enter PIN using the NUMERICAL (0-9) buttons.
    Select Default Setting using the arrow buttons and press the OK button.
    Select Yes and press the OK button to restore all settings to Factory Default.
    Confirm again to start loading default settings. Enter PIN using the NUMERICAL (0-9) button to perform restoring.
    When completing the Default Setting Installation, press the OK button to automatically run the Installation Wizard.
    Last edited by allycoops; 28 November, 2010, 22:58.


    Let the others come after us, We welcome the chase

    Comment

    • ssttaagg
      Member
      • Feb 2010
      • 71

      #3
      will it clear my h/drive .

      Comment

      • allycoops
        V.I.P. Member
        • Feb 2008
        • 1075

        #4
        Yes Mate I would think so.


        Let the others come after us, We welcome the chase

        Comment

        • ssttaagg
          Member
          • Feb 2010
          • 71

          #5
          best let the wife watch her films first then befor i do it

          Comment

          • dave-h
            DK Veteran
            • Apr 2010
            • 659

            #6
            It's a known issue with some Humax HDRs...Try

            Switching off the power using the switch at the rear. Wait till the red led goes out, Power back on again and press the front boot switch. It will start to boot and shut down again. Press boot a second time hopefully the retune message won't be there.

            If that doesn't work try a factory reset - It wont delete your recordings by the way, but it will delete any recording reservations/series links you have set

            Comment

            Working...